It's possible to disable fastlock.h and futex_lock.h in the Makefile.conf?
Thanks Regards, Caio Pereira 2015-10-20 18:49 GMT-02:00 Caio <[email protected]>: > Ovidiu, > > My Log > > echo $CC_EXTRA_OPTS > -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon > --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6" > > CPU=armv7a > LD=arm-poky-linux-gnueabi-ld > --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6 > > CC=arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork > -mfloat-abi=hard -mfpu=neon > --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6 > > > cat Makefile.conf > > #DEFS+= -DPKG_MALLOC #Uses a faster malloc (exclusive w/ USE_SHM_MEM) > DEFS+= -DSHM_MMAP #Use mmap instead of SYSV shared memory > DEFS+= -DUSE_MCAST #Compile in support for IP Multicast > DEFS+= -DDISABLE_NAGLE #Disabled the TCP NAgle Algorithm ( lower delay ) > DEFS+= -DSTATISTICS #Enables the statistics manager > DEFS+= -DHAVE_RESOLV_RES #Support for changing some of the resolver > parameters > #DEFS+= -DHP_MALLOC #High performance allocator with fine-grained locking > #DEFS+= -DF_MALLOC #An even faster allocator. Not recommended for debugging > #DEFS+= -DF_MALLOC_OPTIMIZATIONS #Remove all internal checks in F_MALLOC > #DEFS+= -DDBG_QM_MALLOC #Allocator used for debugging information > #DEFS+= -DUSE_SHM_MEM #All PKG allocations are mapped to SHM ( exclusive > w/ PKG_MALLOC ) > #DEFS+= -DDBG_F_MALLOC #TODO ? > #DEFS+= -DNO_DEBUG #Turns off all debug messages > #DEFS+= -DNO_LOG #Completely turns off all the logging > #DEFS+= -DVQ_MALLOC #TODO ? > #DEFS+= -DFAST_LOCK #Uses fast architecture specific locking > #DEFS+= -DUSE_FUTEX #Uses linux futexs with fast architecture specific > locking > DEFS+= -DUSE_SYSV_SEM #Uses SYSV sems for locking ( slower & limited > number of locks > #DEFS+= -DUSE_PTHREAD_MUTEX #Uses pthread mutexes > #DEFS+= -DBUSY_WAIT #Uses busy waiting on the lock > #DEFS+= -DDBG_LOCK #TODO ? > DEFS+= -DNOSMP #Do not use SMP sompliant locking. Faster but won't work on > SMP machines > #DEFS+= -DEXTRA_DEBUG #Compiles in some extra debugging code > > > make all > Compiling blacklists.c > In file included from blacklists.h:30:0, > from blacklists.c:38: > ip_addr.h: In function 'sockaddr2ip_addr': > ip_addr.h:224:25: warning: cast increases required alignment of target > type [-Wcast-align] > memcpy(ip->u.addr, &((struct sockaddr_in*)sa)->sin_addr, 4); > ^ > ip_addr.h:229:25: warning: cast increases required alignment of target > type [-Wcast-align] > memcpy(ip->u.addr, &((struct sockaddr_in6*)sa)->sin6_addr, 16); > ^ > In file included from locking.h:66:0, > from blacklists.h:32, > from blacklists.c:38: > lock_alloc.h: In function 'lock_set_alloc': > lock_alloc.h:70:13: warning: cast increases required alignment of target > type [-Wcast-align] > ls->locks=(gen_lock_t*)((char*)ls+sizeof(gen_lock_set_t)); > ^ > {standard input}: Assembler messages: > {standard input}:105: Error: bad instruction `btsl $0,[r6]' > {standard input}:106: Error: bad instruction `adcl $0,r3' > {standard input}:208: Error: bad instruction `movb $0,(r3)' > {standard input}:305: Error: bad instruction `btsl $0,[r9]' > {standard input}:306: Error: bad instruction `adcl $0,r3' > {standard input}:390: Error: bad instruction `movb $0,(r3)' > {standard input}:436: Error: bad instruction `btsl $0,[r10]' > {standard input}:437: Error: bad instruction `adcl $0,r3' > {standard input}:480: Error: bad instruction `movb $0,(r3)' > {standard input}:526: Error: bad instruction `btsl $0,[r10]' > {standard input}:527: Error: bad instruction `adcl $0,r3' > {standard input}:555: Error: bad instruction `movb $0,(r2)' > {standard input}:619: Error: bad instruction `btsl $0,[r10]' > {standard input}:620: Error: bad instruction `adcl $0,r3' > {standard input}:718: Error: bad instruction `movb $0,(r3)' > {standard input}:3194: Error: bad instruction `btsl $0,[r7]' > {standard input}:3195: Error: bad instruction `adcl $0,r6' > {standard input}:3249: Error: bad instruction `movb $0,(r3)' > {standard input}:3300: Error: bad instruction `btsl $0,[r7]' > {standard input}:3301: Error: bad instruction `adcl $0,r3' > {standard input}:3340: Error: bad instruction `movb $0,(r0)' > {standard input}:3366: Error: bad instruction `btsl $0,[r6]' > {standard input}:3367: Error: bad instruction `adcl $0,r3' > {standard input}:3411: Error: bad instruction `movb $0,(r1)' > {standard input}:3497: Error: bad instruction `btsl $0,[r6]' > {standard input}:3498: Error: bad instruction `adcl $0,r3' > {standard input}:3542: Error: bad instruction `movb $0,(r1)' > {standard input}:3795: Error: bad instruction `btsl $0,[r6]' > {standard input}:3796: Error: bad instruction `adcl $0,r3' > {standard input}:3839: Error: bad instruction `movb $0,(r3)' > {standard input}:3882: Error: bad instruction `btsl $0,[fp]' > {standard input}:3883: Error: bad instruction `adcl $0,r3' > {standard input}:3981: Error: bad instruction `movb $0,(r3)' > {standard input}:4020: Error: bad instruction `btsl $0,[r6]' > {standard input}:4021: Error: bad instruction `adcl $0,r3' > {standard input}:4081: Error: bad instruction `movb $0,(r3)' > {standard input}:4129: Error: bad instruction `btsl $0,[r10]' > {standard input}:4130: Error: bad instruction `adcl $0,r3' > {standard input}:4381: Error: bad instruction `movb $0,(r3)' > {standard input}:4837: Error: bad instruction `btsl $0,[fp]' > {standard input}:4838: Error: bad instruction `adcl $0,r3' > {standard input}:4951: Error: bad instruction `movb $0,(r3)' > {standard input}:5312: Error: bad instruction `btsl $0,[r6]' > {standard input}:5313: Error: bad instruction `adcl $0,r9' > {standard input}:5383: Error: bad instruction `btsl $0,[r8]' > {standard input}:5384: Error: bad instruction `adcl $0,r5' > {standard input}:5471: Error: bad instruction `movb $0,(r3)' > {standard input}:5510: Error: bad instruction `btsl $0,[r6]' > {standard input}:5511: Error: bad instruction `adcl $0,r3' > {standard input}:5557: Error: bad instruction `movb $0,(r3)' > {standard input}:5596: Error: bad instruction `btsl $0,[r9]' > {standard input}:5597: Error: bad instruction `adcl $0,r3' > {standard input}:5628: Error: bad instruction `movb $0,(r3)' > {standard input}:5889: Error: bad instruction `movb $0,(r3)' > {standard input}:5928: Error: bad instruction `btsl $0,[r8]' > {standard input}:5929: Error: bad instruction `adcl $0,r3' > {standard input}:5975: Error: bad instruction `movb $0,(r3)' > {standard input}:6014: Error: bad instruction `btsl $0,[r9]' > {standard input}:6015: Error: bad instruction `adcl $0,r3' > {standard input}:6045: Error: bad instruction `movb $0,(r3)' > {standard input}:6103: Error: bad instruction `btsl $0,[r10]' > {standard input}:6104: Error: bad instruction `adcl $0,r3' > {standard input}:6203: Error: bad instruction `movb $0,(r3)' > {standard input}:6323: Error: bad instruction `btsl $0,[r6]' > {standard input}:6324: Error: bad instruction `adcl $0,r3' > {standard input}:6421: Error: bad instruction `movb $0,(r3)' > {standard input}:6481: Error: bad instruction `btsl $0,[r9]' > {standard input}:6482: Error: bad instruction `adcl $0,r3' > {standard input}:6582: Error: bad instruction `movb $0,(r3)' > {standard input}:7101: Error: bad instruction `btsl $0,[r1]' > {standard input}:7102: Error: bad instruction `adcl $0,r3' > {standard input}:7232: Error: bad instruction `movb $0,(r3)' > {standard input}:7394: Error: bad instruction `btsl $0,[r2]' > {standard input}:7395: Error: bad instruction `adcl $0,r1' > {standard input}:7527: Error: bad instruction `movb $0,(r3)' > {standard input}:7803: Error: bad instruction `btsl $0,[r6]' > {standard input}:7804: Error: bad instruction `adcl $0,r3' > {standard input}:7912: Error: bad instruction `movb $0,(r3)' > {standard input}:8809: Error: bad instruction `btsl $0,[r4]' > {standard input}:8810: Error: bad instruction `adcl $0,r3' > {standard input}:8852: Error: bad instruction `movb $0,(r1)' > {standard input}:8883: Error: bad instruction `btsl $0,[r5]' > {standard input}:8884: Error: bad instruction `adcl $0,r3' > {standard input}:8930: Error: bad instruction `movb $0,(r3)' > {standard input}:8980: Error: bad instruction `btsl $0,[r10]' > {standard input}:8981: Error: bad instruction `adcl $0,r3' > {standard input}:9020: Error: bad instruction `movb $0,(r0)' > make: *** [blacklists.o] Error 1 > > > > > > Thank you. > > Best Regards, > > Caio Pereira > > > 2015-10-20 18:28 GMT-02:00 Caio <[email protected]>: > >> Ovidiu Sas, >> >> >> In the Makefile.defs there a code to get the ARCH >> >> 90 ARCH := $(shell $(GETARCH) |sed -e s/i.86/i386/ -e s/sun4u/sparc64/ >> \ >> 91 -e s/armv4l/arm/ -e "s/Power Macintosh/ppc/" >> \ >> 92 -e s/sun4v/sparc64/ -e "s/cobalt/mips2/" \ >> 93 -e s/amd64/x86_64/ ) >> >> >> I tried export ARCH=armv7 but because of the code, the ARCH will be >> always x86-64 (host machine) . >> >> I added the CFLAGS to the armv7 arch in the Makefile.defs >> >> 918 ifeq ($(ARCH), armv7) >> 919 # if gcc >> 920 ifeq ($(CC_NAME), gcc) >> 921 #common stuff >> 922 CFLAGS+=-O0 -mfloat-abi=hard >> -march=armv7-a -mthumb-interwork -Wcast-align $(PROFILE) \ >> 923 -mfloat-abi=hard -mfpu=neon >> -mtune=cortex-a9 -Wall >> 924 endif >> 925 endif >> >> >> Which is the best way to pass the arch parameter to the Makefile? >> >> (sorry for the typo in the last email). >> >> Thank you very much. >> >> Best Regards, >> >> Caio Pereira >> >> 2015-10-20 17:17 GMT-02:00 Ovidiu Sas <[email protected]>: >> >>> The optimizations are done via the compiler flags: CFLAGS. >>> You need to replace -09 with -00. >>> You need to check if you are using a native compiler or a cross one >>> and adjust the proper flags inside Makefile.defs. >>> >>> Regards, >>> Ovidiu Sas >>> >>> On Tue, Oct 20, 2015 at 1:53 PM, Caio <[email protected]> wrote: >>> > Hello, Oividiu! >>> > >>> > Sorry for the delay, I was on vacation. >>> > >>> > I'm writing a recipe to Yocto. >>> > This ARM cpu is new (armv7-a), but I see that is not compatible with >>> > opensips's optimization. >>> > I'm new with opensips, I have only tested in my host machine x86-64. >>> > >>> > >>> > Do you know with parameters I need to comment in the Makefile.conf to >>> have a >>> > basic compilation without any optimization in the opensips? >>> > >>> > >>> > #DEFS+= -DPKG_MALLOC #Uses a faster malloc (exclusive w/ USE_SHM_MEM) >>> > #DEFS+= -DSHM_MMAP #Use mmap instead of SYSV shared memory >>> > DEFS+= -DUSE_MCAST #Compile in support for IP Multicast >>> > DEFS+= -DDISABLE_NAGLE #Disabled the TCP NAgle Algorithm ( lower delay >>> ) >>> > DEFS+= -DSTATISTICS #Enables the statistics manager >>> > DEFS+= -DHAVE_RESOLV_RES #Support for changing some of the resolver >>> > parameters >>> > #DEFS+= -DHP_MALLOC #High performance allocator with fine-grained >>> locking >>> > DEFS+= -DF_MALLOC #An even faster allocator. Not recommended for >>> debugging >>> > #DEFS+= -DF_MALLOC_OPTIMIZATIONS #Remove all internal checks in >>> F_MALLOC >>> > #DEFS+= -DDBG_QM_MALLOC #Allocator used for debugging information >>> > #DEFS+= -DUSE_SHM_MEM #All PKG allocations are mapped to SHM ( >>> exclusive w/ >>> > PKG_MALLOC ) >>> > #DEFS+= -DDBG_F_MALLOC #TODO ? >>> > #DEFS+= -DNO_DEBUG #Turns off all debug messages >>> > #DEFS+= -DNO_LOG #Completely turns off all the logging >>> > #DEFS+= -DVQ_MALLOC #TODO ? >>> > #DEFS+= -DFAST_LOCK #Uses fast architecture specific locking >>> > #DEFS+= -DUSE_FUTEX #Uses linux futexs with fast architecture specific >>> > locking >>> > #DEFS+= -DUSE_SYSV_SEM #Uses SYSV sems for locking ( slower & limited >>> number >>> > of locks >>> > #DEFS+= -DUSE_PTHREAD_MUTEX #Uses pthread mutexes >>> > #DEFS+= -DBUSY_WAIT #Uses busy waiting on the lock >>> > #DEFS+= -DDBG_LOCK #TODO ? >>> > >>> > >>> > >>> > Thank you! >>> > >>> > Best Regards, >>> > >>> > Caio Pereira >>> > >>> > >>> > 2015-09-23 21:48 GMT-03:00 Ovidiu Sas <[email protected]>: >>> >> >>> >> Hello Caio, >>> >> >>> >> Have you managed to cross compile opensips? >>> >> The optimizations do not work for older type of arm CPUs. >>> >> Did you experienced any issues running opensips on arm? >>> >> >>> >> Regards, >>> >> Ovidiu Sas >>> >> >>> >> On Thu, Sep 17, 2015 at 2:51 PM, Caio <[email protected]> wrote: >>> >> > Hello, >>> >> > >>> >> > I would like to cross compile the opensips to ARMv7 architecture >>> >> > (Freescale >>> >> > IMX6). >>> >> > I saw that there's some optimization in assembly to lock functions. >>> >> > There's some configuration in the Makeconfig.conf options that I >>> need >>> >> > disable or enable to able the opensips run in my target >>> architecutre? >>> >> > >>> >> > Thank you very much. >>> >> > >>> >> > Best Regards >>> >> > >>> >> > >>> >> > >>> >> > -- >>> >> > ---------------------------------------------- >>> >> > Caio Pereira >>> >> > >>> >> > _______________________________________________ >>> >> > Users mailing list >>> >> > [email protected] >>> >> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>> >> > >>> >> >>> >> >>> >> >>> >> -- >>> >> VoIP Embedded, Inc. >>> >> http://www.voipembedded.com >>> >> >>> >> _______________________________________________ >>> >> Users mailing list >>> >> [email protected] >>> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>> > >>> > >>> > >>> > >>> > -- >>> > ---------------------------------------------- >>> > Caio Pereira >>> > >>> > _______________________________________________ >>> > Users mailing list >>> > [email protected] >>> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>> > >>> >>> >>> >>> -- >>> VoIP Embedded, Inc. >>> http://www.voipembedded.com >>> >>> _______________________________________________ >>> Users mailing list >>> [email protected] >>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>> >> >> >> >> -- >> ---------------------------------------------- >> Caio Pereira >> > > > > -- > ---------------------------------------------- > Caio Pereira > -- ---------------------------------------------- Caio Pereira
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
