Do you see the incoming traffic on the opensips machine (check with
ngrep/tcpdump). Have you checked if OpenSIPS is listening on the right
port (where the traffic is sent to) via "netstat -ulnp| greop opensips"
? Do you see any pending data on the socket ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 26.01.2016 10:46, Jason Bedward wrote:
When traiffic comes in for example options, it does not respond or
seem to process. There are no logs in opensips for this traffic coming
through.
On 26 Jan 2016 07:57, "Bogdan-Andrei Iancu" <[email protected]
<mailto:[email protected]>> wrote:
In this case can you elaborate on "opensips does not process
traffic" ? do you see waiting data on the listening sockets ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 26.01.2016 00:32, Jason Bedward wrote:
I have the below already set.:
alias=42.48.159.140
listen=udp:eth0:5060
advertised_address=42.48.159.140
On Mon, Jan 25, 2016 at 1:37 PM, Jason Bedward
<[email protected] <mailto:[email protected]>> wrote:
Hi
I have opensips listening to all. If I type Opensips it
displays local and advertised ip addresses.
Not sure why it's not working as it should.
Regards
Hi Jason,
If running in Amazon, what you have to do is:
1) set as listener into opensips the local/private IP of the
machine
2) set as "advertise_address" and as "alias" the elastic
IP/public you have.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 23.01.2016 20:08, Jason Bedward wrote:
Hi,
I have previously had this working without issue. But for
some reason now I can not get it to work. I have set
advertised IP, and Opensips is showing that its waiting for
traffic on that IP.
But when traiffic comes in OpenSIPS does not process it. I
have used ngrep to monitor. OpenSIPS itself seems to be
working as I have a keep alive which was talking to a
freeswitch server that was working.
I have taken the same config and put it on Digital Ocean and
it worked first time.
Also I have tried version 1.71, 1.8, 2 all with same result.
Anyone having success that could give advice?
Thanks
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
