Hi Ping,
In script, in a b2b route, you can look at the callid or TO tag
(depending on the direction) to get the key :
http://www.opensips.org/html/docs/modules/2.2.x/b2b_logic.html#id294094
The B2B uses that key as Call-ID when acting as UAC and as To tag when
acting as UAS. You can run a SIP capture to see the traffic.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 02.06.2016 05:13, Ping Han wrote:
Hi Bogdan,
Thanks for the information.
I need the value in the Opensips cfg.
I understand that I can query the b2b_logic or b2b_entities tables to
get the value in Opensips config. Apart from that could you tell me
other way to easily access the value in Opensips config?
Thanks,
Ping
On Wed, Jun 1, 2016 at 5:13 PM, Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
Hi Ping,
Indeed, my bad - the docs are not updated, as that param was
disabled long time ago (4 years ago):
https://sourceforge.net/p/opensips/bugs/502/
Still, there are available option. But the question is : do you
need that value in OpenSIPS cfg or outside OpenSIPS ? as there are
different way to get the ID.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 01.06.2016 03:48, Ping Han wrote:
Hi Bogdan,
Thank you very much for your reply.
I have tried to use the module parameter "b2bl_key_avp" as
described in the document as below.
------------------------------------
modparam("b2b_logic", "b2bl_key_avp", "$avp(99)")
------------------------------------
However, I got the following errors when the Opensips is restarted.
------------------------------------
ERROR:core:set_mod_param_regex: parameter <b2bl_key_avp> not
found in module <b2b_logic>
------------------------------------
I am using the Opensips version opensips-2.1.2-1.el6.x86_64 (rpm).
Thanks,
Chris
On Tue, May 31, 2016 at 6:01 PM, Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
Hi Chris,
The "dialog_id" is actually the b2b key, that is expose by
the b2b_logic via the module parameter b2bl_key_avp. See:
http://www.opensips.org/html/docs/modules/2.1.x/b2b_logic.html#id294094
That key can also be found in the b2b_logic table in DB.
At signaling level, the key is the Call-ID of the outbound
calls from b2b.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 23.05.2016 07:32, Ping Han wrote:
Hi Bogdan,
I asked the question a few days ago but have not got a
response.
I am just wondering if I could get some advice from you.
Any advice will be appreciated.
Thanks,
Chris
On Wed, May 18, 2016 at 4:39 PM, Ping Han
<[email protected] <mailto:[email protected]>> wrote:
Hi,
I would like to use the b2b_bridge fifo function as
specified at
http://www.opensips.org/html/docs/modules/2.1.x/b2b_logic.html#id248916.
The function will be triggered by a third party. I will
need to pass the parameters to the third party for it to
trigger the function. One of the parameters is the
"dialog-id".
The problem is that I am not sure how the value of the
dialog-id can be available in the Opensips config. Is
there any Opensips modules/function that can retrieve
the value of the dialog-id?
I tried to get the value from the "b2b_entities" and
"b2b_logic" table. However, it seems that it does not
work this way because the two tables do not pop the data
in real time. Sometimes I can see the data but sometimes
I am not able to see it.
It is appreciated that you can give me some idea.
Thanks,
Ping
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
