My script has if (is_method("INVITE") && !has_totag() && check_source_address(0)) { xlog("[ROUTE]Incoming call to MS: RURI=$ruri, SI=$si, M=$rm\n"); trace("tid"); create_dialog(); do_routing(1); strip(1); prefix("+44"); record_route_preset("sbc.ip-sentinel.com:5091;transport=tls", "10.0.0.5:5060"); add_rr_param(";r2=on"); route(relay);
Which is turning this: James Hogbin Director IP Sentinel t. +44 (0)20 3011 4150 m. +44 7786910895 w. https://www.ip-sentinel.com INVITE sip:08435577...@sbc.ip-sentinel.com SIP/2.0 Via: SIP/2.0/UDP 13.80.245.144:5080;rport;branch=z9hG4bK1tDv8cQgjXXaj Max-Forwards: 68 From: "James Hogbin" <sip:+442030114146@13.80.245.144>;tag=8tKmNZc4FpF3D To: <sip:08435577...@sbc.ip-sentinel.com> Into: INVITE sip:+448435577...@sip.pstnhub.microsoft.com SIP/2.0 Record-Route: <sip:sbc.ip-sentinel.com:5091;transport=tls;ftag=8tKmNZc4FpF3D;lr;did=688.48bca672> Record-Route: <sip:10.0.0.5:5060;ftag=8tKmNZc4FpF3D;lr;did=688.48bca672> Via: SIP/2.0/TLS 137.117.136.143:5091;branch=z9hG4bKb195.04f15415.0 Via: SIP/2.0/UDP 13.80.245.144:5080;received=13.80.245.144;rport=5080;branch=z9hG4bK1tDv8cQgjXXaj Max-Forwards: 68 From: "James Hogbin" <sip:+442030114146@13.80.245.144>;tag=8tKmNZc4FpF3D To: <sip:08435577...@sbc.ip-sentinel.com> BUT the Record routes do not have ;r2=on in them I think this is causing an issue with ACK & BYE from the PBX hanging off the 5050 port IP Sentinel Disclaimer This communication is for the information of the person to whom it has been delivered and neither it nor any of its contents should be passed on to or used by any other person. IP Sentinel Ltd is a limited company registered in England and Wales under Registered Number 08648097. Registered Office: Newnhams Wood, Horsted Keynes, West Sussex, RH17 7BT. Disclaimer: Q3dhRSrm_disclaimer
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users