Hi,
I’m using opensips V3.0.3 with a pool of two rtpengine. For maintenance reason, i need sometimes to stop an rtpengine server. When I run the command to disable one of my rtpengine “opensips-cli -x mi rtpengine_enable udp: 10.207.201.25:2223 0”, if there is current traffic on it, the new delete commands sent by opensips are sent to the other rtpengine (10.207.201.24) ex : 10.207.201.39:49799 -> 10.207.201.25:2223 18035_4 d3:sdp259:v=0..o=root 1293627189 1293627189 IN IP4 185.101.180.169..s=Maniterm Media Server..c=IN IP4 185.101.180.169..t=0 0..m=audio 12792 RTP/AVP 8 101..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-16..a=ptime :20..a=maxptime:150..a=sendrecv..3:ICE6:remove7:replacel18:session-connection6:origine18:transport-protocol7:RTP/AVP7:call-id53:[email protected]:506013:received-froml3:IP415:185.101.180.169e8:from-tag10:as5d6bc41 17:command5:offer # U 10.207.201.25:2223 -> 10.207.201.39:49799 18035_4 d3:sdp271:v=0..o=root 1293627189 1293627189 IN IP4 185.101.180.91..s=Maniterm Media Server..c=IN IP4 185.101.180.91..t=0 0..m=audio 37426 RTP/AVP 8 101..a=maxptime:150..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-16..a=sendrecv..a=rtcp:37427..a=ptime:20..6:result2:oke # U 10.207.201.39:49799 -> 10.207.201.25:2223 18035_5 d3:sdp282:v=0..o=root 325023848 325023848 IN IP4 185.9.251.208..s=Asterisk PBX 11.11.0~dfsg-2+alphalink-1..c=IN IP4 185.9.251.208..t=0 0..m=audio 21778 RTP/AVP 8 101..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0 -16..a=silenceSupp:off - - - -..a=ptime:20..a=sendrecv..3:ICE6:remove7:replacel18:session-connection6:origine18:transport-protocol7:RTP/AVP7:call-id53:[email protected]:506013:received-froml3:IP413:185.9.251.192e8 :from-tag10:as3fdd699a6:to-tag10:as5d6bc4117:command5:offer # U 10.207.201.25:2223 -> 10.207.201.39:49799 18035_5 d3:sdp298:v=0..o=root 325023848 325023848 IN IP4 185.101.180.91..s=Asterisk PBX 11.11.0~dfsg-2+alphalink-1..c=IN IP4 185.101.180.91..t=0 0..m=audio 37446 RTP/AVP 8 101..a=silenceSupp:off - - - -..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telep hone-event/8000..a=fmtp:101 0-16..a=sendrecv..a=rtcp:37447..a=ptime:20..6:result2:oke # U 10.207.201.39:55934 -> 10.207.201.25:2223 18038_5 d3:sdp282:v=0..o=root 325023848 325023848 IN IP4 185.9.251.208..s=Asterisk PBX 11.11.0~dfsg-2+alphalink-1..c=IN IP4 185.9.251.208..t=0 0..m=audio 21778 RTP/AVP 8 101..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0 -16..a=silenceSupp:off - - - -..a=ptime:20..a=sendrecv..3:ICE6:remove7:replacel18:session-connection6:origine18:transport-protocol7:RTP/AVP7:call-id53:[email protected]:506013:received-froml3:IP413:185.9.251.192e8 :from-tag10:as3fdd699a6:to-tag10:as5d6bc4117:command5:offer # U 10.207.201.25:2223 -> 10.207.201.39:55934 18038_5 d3:sdp298:v=0..o=root 325023848 325023848 IN IP4 185.101.180.91..s=Asterisk PBX 11.11.0~dfsg-2+alphalink-1..c=IN IP4 185.101.180.91..t=0 0..m=audio 37446 RTP/AVP 8 101..a=silenceSupp:off - - - -..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telep hone-event/8000..a=fmtp:101 0-16..a=sendrecv..a=rtcp:37447..a=ptime:20..6:result2:oke running command opensips-cli -x mi rtpengine_enable udp: 10.207.201.25:2223 # U 10.207.201.39:44347 -> 10.207.201.24:2223 18037_7 d7:call-id53:[email protected]:506013:received-froml3:IP413:185.9.251.192e8:from-tag10:as3fdd699a7:command6:delete # U 10.207.201.24:2223 -> 10.207.201.39:44347 18037_7 d7:warning38:Call-ID not found or tags didn't match6:result2:oke In that case there ghost call on stopped rtpengine, because it never received the delete message. Is there a way to run a graceful disable (continue to send delete or new offer for current traffic, but not accepting new call) ? thanks
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
