Dear Donat,
I REALLY REALLY appreciate your comments and help!! It got the ball rolling for me. I was stuck a bit because I’m so unfamiliar with OpenSIPs and RTPproxy and the info out there is sparce or a little openended. Not sure what to focus on or ignore. I finally got it working! Only a little bit left I need to do so that it all works automatically when I reboot. Right now after a reboot it does not listen still on port 12221 For now I just did the startup command via the command line to see if it would work. root@sip:/usr/src/rtpproxy# rtpproxy -l 10.1.1.57 -s udp:localhost:12221 -F I probably need to add the Public IP and 127.0.0.1 or localhost also for -l command line option. root@sip:/usr/src/rtpproxy# rtpproxy -V 2.2.alpha.3a82dd9d Feb 12 17:22:27 sip /usr/sbin/opensips[16714]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16715]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16720]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16718]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16719]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16721]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16722]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16724]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16723]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16726]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16725]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip /usr/sbin/opensips[16728]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled Feb 12 17:22:27 sip systemd[1]: Started OpenSIPS is a very fast and flexible SIP (RFC3261) server. Feb 12 17:22:27 sip /usr/sbin/opensips[16730]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:localhost:12221> found, support for it enabled ------------------------------------------------------------------------------------------------------------------------ Rick McGill – CEO r...@netrovoip.com | r...@netropolitanworks.com Thailand: +66-2105-4262 x1001 | USA: +1-737-237-2030 | Mobile: +66-85557-3000 Support:: +66-97047-2000 | SKYPE & LINE ID: NetroVOIP | supp...@netrovoip.com ₪ www.NetroVOIP.com Telecommunications / Video Consulting & Solutions Provider -------------------------------------------------------------------------------------------------------------------------- From: Donat Zenichev <donat.zenic...@gmail.com> Sent: Friday, February 12, 2021 3:22 PM To: Rick McGill - ₪ <r...@netrovoip.com> Cc: OpenSIPS users mailling list <users@lists.opensips.org> Subject: Re: [OpenSIPS-Users] OpenSIPs 3.1 New install ERROR in Logs rtpproxy Good day Rick, sure I'm always glad to help. OpenSIPS is first of all a SIP proxy. That's why you get OpenSIPS binary, accompanying shared libraries (.so libraries) and configuration files for it (opensips script, it's C-like). And as another side of OpenSIPS, which is perfect and powerful, you can always add needed modules to it for any desires you have, e.g.: media proxying (RTPproxy in your case), B2B logic, fraud detection/protection, load-balancing etc. etc. (this list is dramatically huge). Here you can find a list of useful guidelines provided by OpenSIPS dev team: https://www.opensips.org/Documentation/Manual-3-1 If you wonder how to start with RTPproxy, I would advise to compile 2.0 firstly. It's here: https://github.com/sippy/rtpproxy/tree/rtpp_2_0 Looking in the experience back, this version showed itself as the best one. Still, I want to underline that I might be mistaken about what relates to the most stable version, as things could have changed during the course of time. As a guideline to RTPproxy, please try to look into that: https://www.rtpproxy.org/doc/master/user_manual.html Then depending on which supervisor you use (if you have debian 10.7, that should be systemd), you can form a configuration file for RTPproxy service and you can pick out which parameters to hand to the rtpproxy binary at the start time. Options and syntax of their usage can be obtained at the user manual I mentioned above. Best regards. On Fri, Feb 12, 2021 at 9:22 AM Rick McGill - ₪ <r...@netrovoip.com <mailto:r...@netrovoip.com> > wrote: Dear Donat, No I did not install or compile RTPproxy yet. I'm very new to OpenSIPs but have knowledge in other areas of Telco. I'm using the OpenSIPS quick start guides. Surprised that RTPproxy is not even mentioned in them considering the need for it to get OpenSIPs to work. Anyway thanks for your reply. Just your questions got me pointed in the right direction. ------------------------------------------------------------------------------------------------------------------------ Rick McGill – CEO r...@netrovoip.com <mailto:r...@netrovoip.com> | r...@netropolitanworks.com <mailto:r...@netropolitanworks.com> Thailand: +66-2105-4262 x1001 | USA: +1-737-237-2030 | Mobile: +66-85557-3000 Support:: +66-97047-2000 | SKYPE & LINE ID: NetroVOIP | supp...@netrovoip.com <mailto:supp...@netrovoip.com> ₪ www.NetroVOIP.com <http://www.NetroVOIP.com> Telecommunications / Video Consulting & Solutions Provider -------------------------------------------------------------------------------------------------------------------------- From: Donat Zenichev <donat.zenic...@gmail.com <mailto:donat.zenic...@gmail.com> > Sent: Thursday, February 11, 2021 2:37 PM To: OpenSIPS users mailling list <users@lists.opensips.org <mailto:users@lists.opensips.org> > Subject: Re: [OpenSIPS-Users] OpenSIPs 3.1 New install ERROR in Logs rtpproxy Good day Rick. It looks like your OpenSIPS instance is complaining due to the absence of RTPproxy daemon. Or at least a socket, which OpenSIPS tries to use, is not reachable for some reason (udp:localhost:12221). Have you compiled the RTPproxy already? And also could you share your configuration of rtpproxy.so ? Best regards On Thu, Feb 11, 2021 at 9:28 AM Rick McGill - ₪ <mailto:r...@netrovoip.com <mailto:r...@netrovoip.com> > wrote: Dear OpenSIPs Community, I have a fresh install of OpenSIPs 3.1 on Debian 10.7 I have done the basic install but it is yet to be configured with any gateways and only has a few test users setup on it. I'm new to OpenSIPs. The ERROR issue I'm seeing in the log files seems related to rtpproxy. I’m not familiar yet with OpenSIPs so if someone could at least point in the right direction to start to solve this error it might save me a lot of time Googling. ----------------------------- Feb 11 13:32:03 sip /usr/sbin/opensips[1704]: WARNING:rtpproxy:rtpp_test: support for RTP proxy <udp:localhost:12221> has been disabled temporarily Feb 11 13:32:03 sip /usr/sbin/opensips[1703]: ERROR:rtpproxy:send_rtpp_command: can't send (#2 iovec buffers) command to a RTP proxy (111:Connection refused) Feb 11 13:32:03 sip /usr/sbin/opensips[1703]: ERROR:rtpproxy:send_rtpp_command: proxy <udp:localhost:12221> does not respond, disable it Feb 11 13:32:03 sip /usr/sbin/opensips[1703]: WARNING:rtpproxy:rtpp_test: can't get version of the RTP proxy ----------------------------- ---------------------------------------------------------------------------- -------------------------------------------- Rick McGill – CEO mailto:r...@netrovoip.com <mailto:r...@netrovoip.com> | mailto:r...@netropolitanworks.com <mailto:r...@netropolitanworks.com> Thailand: +66-2105-4262 x1001 | USA: +1-737-237-2030 | Mobile: +66-85557-3000 Support:: +66-97047-2000 | SKYPE & LINE ID: NetroVOIP | mailto:supp...@netrovoip.com <mailto:supp...@netrovoip.com> ₪ http://www.NetroVOIP.com Telecommunications / Video Consulting & Solutions Provider ---------------------------------------------------------------------------- ---------------------------------------------- _______________________________________________ Users mailing list mailto:Users@lists.opensips.org <mailto:Users@lists.opensips.org> http://lists.opensips.org/cgi-bin/mailman/listinfo/users -- Best regards, Donat Zenichev -- Best regards, Donat Zenichev
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
