In your configuration I see nothing that may degenerate into creating
additional procs (like exec module, auto_scaling, etc). And I assume you
have no traffic (SIP or MI) while you get this increasing number of
procs (basically opensips should be ideal), right ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com
https://www.siphub.com
On 6/28/23 12:17 PM, Sasmita Panda wrote:
centos9 :
initially when running the config
number of process : 22
after 5/10min - number of process 169 . That increases gradually as
well .
centos8 :
initially when running the config
number of process : 22
This is maintained throughout . It's not increasing at all .
socket :
socket=udp:ip:5505
socket=udp:ip:5508
This is configured in both the servers . Config is the same for both .
config file : https://pastebin.com/huJ7yc4b
<https://pastebin.com/huJ7yc4b>
*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
On Wed, Jun 28, 2023 at 1:16 PM Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
What is the socket and processes configuration you have in the cfg?
How many procs are created at the end on the working centos8 ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com <https://www.opensips-solutions.com>
https://www.siphub.com <https://www.siphub.com>
On 6/28/23 9:52 AM, Sasmita Panda wrote:
I have installed opensips 3.2 on centos8 , which is working fine
without any error .
Same code I have installed on centos9 latest version , here its
giving the above error . Same as aws ec2 instance and debian 11 .
Is this because of the operating system?
*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
On Wed, Jun 28, 2023 at 10:07 AM Sasmita Panda
<[email protected] <mailto:[email protected]>> wrote:
Yes , I knew that . But I have mentioned its not in the
starting . When I am starting opensips service everything is
fine and running properly .
After sometime this error is comming when the number of
process increases which results more numbr of DB connection .
When the limit reaches that error is comming .
But this is happening in the run time . Not in the initial
stage .
*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
On Tue, Jun 27, 2023 at 7:01 PM Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
The logs say your opensips fail to start a due to DB
issues : `ERROR:db_mysql:db_mysql_connect: driver
error(1040): Too many connections`
Rule number one : *READ THE LOGS* !
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com
<https://www.opensips-solutions.com>
https://www.siphub.com <https://www.siphub.com>
On 6/27/23 12:18 PM, Sasmita Panda wrote:
No , I am running only 1 instance of opensips in one
ec2-instance here .
When I am starting Openisps .
*ps -aef| grep opensips | wc -l * : this command output
is *22 *
*
*
/usr/local/bin/opensips-cli -x mi ps : Output of this
command while starting .*
*
https://pastebin.com/H0yNeecA
<https://pastebin.com/H0yNeecA>
*
*
*After 5/10mins when I am running the same command :*
*ps -aef| grep opensips | wc -l * : output is *169 *(its
increasing gradually )*
*
And at that time eventually the fifo file is also
getting deleted .
As this increases , after sometime there are too many
open connections with Mysql getting created and hence
there are some errors as well for "too many open
connections " .
Below is the logs I am getting .
https://pastebin.com/E6WxjeiC
<https://pastebin.com/E6WxjeiC>
At this point , my call is also not getting connected as
the dynamic routing module is not getting initiated .
I was about to upgrade my whole system to 3.2 and in the
last stage I am facing this issue . Quit blocked here .
From long time I am trying to debug this but not getting
any hunch .
Please help .
*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
On Tue, Jun 27, 2023 at 2:16 PM Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
Hi,
Be sure you are not running multiple instance of
OpenSIPS, fighting over the fifo file.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com
<https://www.opensips-solutions.com>
https://www.siphub.com <https://www.siphub.com>
On 6/27/23 11:00 AM, Sasmita Panda wrote:
Hi ,
Initially when I am running the process I'm getting
the *opensips_fifo *file inside /*tmp *directory .
But after some time that file is getting deleted
automatically and hence I am not able to run
opensips-cli command as well .
What can be the reason ? Where do I start debugging ?
*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
On Tue, Jun 6, 2023 at 2:10 PM Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>>
wrote:
Hi,
Doing `opensips-cli -x mi ps` will list all the
opensips processes and their role within
OpenSIPS - this will help you understand the
overall set of procs.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com
<https://www.opensips-solutions.com>
https://www.siphub.com <https://www.siphub.com>
On 6/1/23 2:37 PM, Sasmita Panda wrote:
In 3.2 I think we are not defining children
per process . We have udp_worker or tcp_worker .
log_level=4
log_stderror=no
log_facility=LOG_LOCAL5
#udp_workers=4
tcp_workers=2
disable_dns_blacklist=yes
This is my configuration .
*/
/*
*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
On Thu, Jun 1, 2023 at 4:53 PM Richard Robson
<[email protected]
<mailto:[email protected]>> wrote:
How many children are defined in your
script. You will get one process per child
Richard
On Thu, 1 Jun 2023, 11:47 Sasmita Panda,
<[email protected]
<mailto:[email protected]>> wrote:
Hi All ,
I am using opensips 3.2
version: opensips 3.2.3 (x86_64/linux)
flags: STATS: On, DISABLE_NAGLE,
USE_MCAST, SHM_MMAP, PKG_MALLOC,
Q_MALLOC, F_MALLOC, HP_MALLOC,
DBG_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024,
MAX_RECV_BUFFER_SIZE 262144,
MAX_LISTEN 16, MAX_URI_SIZE 1024,
BUF_SIZE 65535
poll method support: poll, epoll,
sigio_rt, select.
svn revision: 3831:3864
main.c compiled on 07:29:49 Jun 21
2022 with gcc 10
When I am initially starting the
service I am getting a single process
running . After some time when I am
checking there are so many processes
running automatically . I have pasted
the output of the below file .
Please update here what's the reason
behind this .
https://pastebin.com/gu3Js6Fe
<https://pastebin.com/gu3Js6Fe>
*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software
Engineer/
/3CLogic , ph:07827611765/
_______________________________________________
Users mailing list
[email protected]
<mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
_______________________________________________
Users mailing list
[email protected]
<mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
