After reading many docs, googled, chatgpt, I barely have a working configuration with only REGISTER working , but INVITE not working:
``` opensips.cfg # # OpenSIPS residential configuration script # by OpenSIPS Solutions <[email protected]> # # This script was generated via "make menuconfig", from # the "Residential" scenario. # You can enable / disable more features / functionalities by # re-generating the scenario with different options.# # # Please refer to the Core CookBook at: # https://opensips.org/Resources/DocsCookbooks # for a explanation of possible statements, functions and parameters. # ####### Global Parameters ######### /* uncomment the following lines to enable debugging */ #debug_mode=yes ### default log level is 3, change to 4 for debugging log_level=4 xlog_level=4 stderror_enabled=yes syslog_enabled=yes syslog_facility=LOG_LOCAL0 udp_workers=4 /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes #socket=udp:127.0.0.1:5060 # CUSTOMIZE ME socket=udp:192.168.113.144:5060 #listen=udp:192.168.113.144:5060 ####### Modules Section ######## #set module path mpath="/usr/lib/x86_64-linux-gnu/opensips/modules/" ### add for freeswitch loadmodule "db_postgres.so" #### SIGNALING module loadmodule "signaling.so" #### StateLess module loadmodule "sl.so" #### Transaction Module loadmodule "tm.so" modparam("tm", "fr_timeout", 5) modparam("tm", "fr_inv_timeout", 30) modparam("tm", "restart_fr_on_each_reply", 0) modparam("tm", "onreply_avp_mode", 1) #### Record Route Module loadmodule "rr.so" /* do not append from tag to the RR (no need for this script) */ modparam("rr", "append_fromtag", 0) ### add for freeswitch loadmodule "dialog.so" modparam("dialog", "db_mode", 1) modparam("dialog", "db_url", "postgres:// opensips:[email protected]/opensips") #### MAX ForWarD module loadmodule "maxfwd.so" ### add for freeswitch loadmodule "textops.so" #### SIP MSG OPerationS module loadmodule "sipmsgops.so" #### FIFO Management Interface loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/run/opensips/opensips_fifo") # not working either, modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") modparam("mi_fifo", "fifo_mode", 0666) ### add for freeswitch loadmodule "dispatcher.so" modparam("dispatcher", "db_url", "postgres:// opensips:[email protected]/opensips") modparam("dispatcher", "ds_ping_method", "OPTIONS") modparam("dispatcher", "ds_ping_interval", 5) modparam("dispatcher", "ds_probing_threshhold", 2) modparam("dispatcher", "ds_probing_mode", 1) ### add for freeswitch loadmodule "load_balancer.so" modparam("load_balancer", "db_url", "postgres:// opensips:[email protected]/opensips") modparam("load_balancer", "probing_method", "OPTIONS") modparam("load_balancer", "probing_interval", 5) #### USeR LOCation module loadmodule "usrloc.so" modparam("usrloc", "nat_bflag", "NAT") modparam("usrloc", "working_mode_preset", "single-instance-no-db") #### REGISTRAR module loadmodule "registrar.so" modparam("registrar", "tcp_persistent_flag", "TCP_PERSISTENT") /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) #### ACCounting module loadmodule "acc.so" /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_cancels", 0) /* by default we do not adjust the direct of the sequential requests. if you enable this parameter, be sure to enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) loadmodule "proto_udp.so" #### gjw add for rtpengine loadmodule "rtpengine.so" # single rtproxy modparam("rtpengine", "rtpengine_sock", "udp:192.168.113.143:2223") # multiple rtproxies for LB #modparam("rtpengine", "rtpengine_sock", "udp:localhost:12221 udp:localhost:12222") # multiple sets of multiple rtproxies #modparam("rtpengine", "rtpengine_sock", "1 == udp:localhost:12221 udp:localhost:12222") #modparam("rtpengine", "rtpengine_sock", "2 == udp:localhost:12225") ### add for freeswitch ####### Routing Logic ######## # main request routing logic route{ if (!mf_process_maxfwd_header(10)) { send_reply(483,"Too Many Hops"); exit; } if (has_totag()) { # handle hop-by-hop ACK (no routing required) if ( is_method("ACK") && t_check_trans() ) { t_relay(); exit; } # sequential request within a dialog should # take the path determined by record-routing if ( !loose_route() ) { # we do record-routing for all our traffic, so we should not # receive any sequential requests without Route hdr. send_reply(404,"Not here"); exit; } if (is_method("BYE")) { # do accounting even if the transaction fails do_accounting("log","failed"); } # route it out to whatever destination was set by loose_route() # in $du (destination URI). route(relay); exit; } # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } # absorb retransmissions, but do not create transaction t_check_trans(); if ( !(is_method("REGISTER") ) ) { if (is_myself("$fd")) { } else { # if caller is not local, then called number must be local if (!is_myself("$rd")) { send_reply(403,"Relay Forbidden"); exit; } } } # preloaded route checking if (loose_route()) { xlog("L_ERR", "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]"); if (!is_method("ACK")) send_reply(403,"Preload Route denied"); exit; } # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { # #do_accounting("log"); # # Route to FreeSWITCH # $du = "sip:192.168.113.142:5060"; # forward(); if (!load_balance(1,"pstn","1")) { log("sreekanth invite method\n"); send_reply(503,"Service Unavailable"); exit; } } if (!is_myself("$rd")) { append_hf("P-hint: outbound\r\n"); route(relay); } # requests for my domain if (is_method("PUBLISH|SUBSCRIBE")) { send_reply(503, "Service Unavailable"); exit; } if (is_method("REGISTER")) { # # store the registration and generate a SIP reply # if (!save("location")) # xlog("failed to register AoR $tu\n"); # # exit; if (!ds_select_dst(1, 4)) { send_reply(503,"Service Unavailable"); exit; } } # if ($rU==NULL) { # # request with no Username in RURI # send_reply(484,"Address Incomplete"); # exit; # } # do lookup with method filtering if (!lookup("location","method-filtering")) { t_reply(404, "Not Found"); exit; } # when routing via usrloc, log the missed calls also do_accounting("log","missed"); route(relay); } route[relay] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { t_on_branch("per_branch_ops"); t_on_reply("handle_nat"); t_on_failure("missed_call"); } if (!t_relay()) { send_reply(500,"Internal Error"); } exit; } branch_route[per_branch_ops] { xlog("new branch at $ru\n"); } onreply_route[handle_nat] { xlog("incoming reply\n"); } failure_route[missed_call] { if (t_was_cancelled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply(404,"Not found"); ## exit; ##} } ``` Any idea why INVITE not working? :-) Nine to one <[email protected]> 於 2023年9月14日 週四 下午4:40寫道： > Get idea from another thread: Reading documents :-) > Did that. > > Nine to one <[email protected]> 於 2023年9月14日 週四 上午9:12寫道： > >> Can anyone share the opensips conf file with Freeswitch and rtpengine? >> >
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
