I've created two users and they are registered to opensips. When I try to connect, user 1 to user 2, I get temporarily unavailable. Config file is attached with this email.
-- Regards, B.Prathibha
# # OpenSIPS residential configuration script # by OpenSIPS Solutions <[email protected]> # # Please refer to the Core CookBook at: # http://www.opensips.org/Resources/DocsCookbooks # for a explanation of possible statements, functions and parameters. # ####### Global Parameters ######### log_level=5 xlog_level=5 log_stderror=no log_facility=LOG_LOCAL0 open_files_limit=4096 udp_workers=4 /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes socket=udp:172.31.34.24:5060 as 65.2.167.22:5060 # CUSTOMIZE ME socket=tcp:172.31.34.24:5060 as 65.2.167.22:5060 # CUSTOMIZE ME socket=tls:172.31.34.24:5061 as 65.2.167.22:5061 # CUSTOMIZE ME socket=ws:172.31.34.24:8080 as 65.2.167.22:8080 socket=wss:172.31.34.24:7443 as 65.2.167.22:7443 ####### Modules Section ######## #set module path mpath="/usr/lib/x86_64-linux-gnu/opensips/modules/" #### SIGNALING module loadmodule "signaling.so" #### StateLess module loadmodule "sl.so" #### Transaction Module loadmodule "tm.so" modparam("tm", "fr_timeout", 5) modparam("tm", "fr_inv_timeout", 30) modparam("tm", "restart_fr_on_each_reply", 0) modparam("tm", "onreply_avp_mode", 1) #### Record Route Module loadmodule "rr.so" /* do not append from tag to the RR (no need for this script) */ modparam("rr", "append_fromtag", 0) #### MAX ForWarD module loadmodule "maxfwd.so" #### SIP MSG OPerationS module loadmodule "sipmsgops.so" #### FIFO Management Interface loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") modparam("mi_fifo", "fifo_mode", 0666) #### MYSQL module loadmodule "db_mysql.so" #### HTTPD module loadmodule "httpd.so" modparam("httpd", "port", 8888) #### USeR LOCation module loadmodule "usrloc.so" modparam("usrloc", "nat_bflag", "NAT") modparam("usrloc", "working_mode_preset", "single-instance-sql-write-back") modparam("usrloc", "db_url", "mysql://root:root@localhost/opensips") # CUSTOMIZE ME #### REGISTRAR module loadmodule "registrar.so" modparam("registrar", "tcp_persistent_flag", "TCP_PERSISTENT") modparam("registrar", "received_avp", "$avp(received_nh)")/* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) #### ACCounting module loadmodule "acc.so" /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_cancels", 0) /* by default we do not adjust the direct of the sequential requests. if you enable this parameter, be sure to enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) modparam("acc", "db_url", "mysql://root:root@localhost/opensips") # CUSTOMIZE ME #### AUTHentication modules loadmodule "auth.so" loadmodule "auth_db.so" modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://root:root@localhost/opensips") # CUSTOMIZE ME modparam("auth_db", "load_credentials", "") #### ALIAS module loadmodule "alias_db.so" modparam("alias_db", "db_url", "mysql://root:root@localhost/opensips") # CUSTOMIZE ME #### DIALOG module loadmodule "dialog.so" modparam("dialog", "dlg_match_mode", 1) modparam("dialog", "default_timeout", 21600) # 6 hours timeout modparam("dialog", "db_mode", 2) modparam("dialog", "db_url", "mysql://root:root@localhost/opensips") # CUSTOMIZE ME #### NAT modules loadmodule "nathelper.so" modparam("nathelper", "natping_interval", 10) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", "SIP_PING_FLAG") modparam("nathelper", "sipping_from", "sip:[email protected]") #CUSTOMIZE ME modparam("nathelper", "received_avp", "$avp(received_nh)") loadmodule "rtpengine.so" modparam("rtpengine", "rtpengine_sock", "udp:172.31.34.24:2225") #### DIALPLAN module loadmodule "dialplan.so" modparam("dialplan", "db_url", "mysql://root:root@localhost/opensips") # CUSTOMIZE ME #### MI_HTTP module loadmodule "mi_http.so" loadmodule "proto_udp.so" loadmodule "proto_tcp.so" loadmodule "proto_tls.so" loadmodule "proto_ws.so" loadmodule "proto_wss.so" modparam("proto_wss", "wss_port", 7443) modparam("proto_wss", "wss_max_msg_chunks", 16) loadmodule "tls_openssl.so" #loadmodule "tls_wolfssl.so" loadmodule "tls_mgm.so" modparam("tls_mgm","server_domain", "default") modparam("tls_mgm","verify_cert", "[default]0") modparam("tls_mgm","require_cert", "[default]0") #modparam("tls_mgm","certificate", "[default]/etc/opensips/tls/rootCA/cacert.pem") #modparam("tls_mgm","private_key", "[default]/etc/opensips/tls/rootCA/private/cakey.pem") #modparam("tls_mgm","ca_list", "[bp3.erss.in]/etc/opensips/tls/user/user-calist.pem") modparam("tls_mgm", "tls_method", "[default]SSLv23") modparam("tls_mgm","tls_library","openssl") #modparam("tls_mgm", "certificate", "[default]/etc/opensips/tls/user/caKey.pem") #modparam("tls_mgm", "private_key", "[default]/etc/opensips/tls/user/privateKey.pem") #modparam("tls_mgm", "client_domain", "14.139. modparam("tls_mgm", "certificate", "[default]/home/ubuntu/cert.pem") modparam("tls_mgm", "private_key", "[default]/home/ubuntu/privkey.pem") ####### Routing Logic ######## # main request routing logic route{ # initial NAT handling; detect if the request comes from behind a NAT # and apply contact fixing force_rport(); if (nat_uac_test(23)) { if (is_method("REGISTER")) { fix_nated_register(); setbflag("NAT"); } else { fix_nated_contact(); setflag("NAT"); } } if (!mf_process_maxfwd_header(10)) { send_reply(483,"Too Many Hops"); exit; } if (has_totag()) { # handle hop-by-hop ACK (no routing required) if ( is_method("ACK") && t_check_trans() ) { t_relay(); exit; } # sequential request within a dialog should # take the path determined by record-routing if ( !loose_route() ) { # we do record-routing for all our traffic, so we should not # receive any sequential requests without Route hdr. send_reply(404,"Not here"); exit; } # validate the sequential request against dialog if ( $DLG_status!=NULL && !validate_dialog() ) { xlog("In-Dialog $rm from $si (callid=$ci) is not valid according to dialog\n"); ## exit; } if (is_method("BYE")) { # do accounting even if the transaction fails do_accounting("db","failed"); } if (check_route_param("nat=yes")) setflag("NAT"); # route it out to whatever destination was set by loose_route() # in $du (destination URI). route(relay); exit; } # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } # absorb retransmissions, but do not create transaction t_check_trans(); if ( !(is_method("REGISTER") ) ) { if (is_myself("$fd")) { # authenticate if from local subscriber # authenticate all initial non-REGISTER request that pretend to be # generated by local subscriber (domain from FROM URI is local) if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "auth"); exit; } if ($au!=$fU) { send_reply(403,"Forbidden auth ID"); exit; } consume_credentials(); # caller authenticated } else { # if caller is not local, then called number must be local if (!is_myself("$rd")) { send_reply(403,"Relay Forbidden"); exit; } } } # preloaded route checking if (loose_route()) { xlog("L_ERR", "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]"); if (is_method("INVITE")) { # even if in most of the cases is useless, do RR for # re-INVITEs alos, as some buggy clients do change route set # during the dialog. record_route(); } exit; } # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { # create dialog with timeout if ( !create_dialog("B") ) { send_reply(500,"Internal Server Error"); exit; } do_accounting("db"); } if (!is_myself("$rd")) { append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ## CUSTOMIZE IF NEEDED ##if ($rd=="tls_domain1.net" ## || $rd=="tls_domain2.net" ##) { ## force_send_socket("tls:127.0.0.1:5061"); # CUSTOMIZE ##} route(relay); } # requests for my domain if (is_method("PUBLISH|SUBSCRIBE")) { send_reply(503, "Service Unavailable"); exit; } if (is_method("REGISTER")) { # authenticate the REGISTER requests if (!www_authorize("", "subscriber")) { www_challenge("", "auth"); exit; } if ($au!=$tU) { send_reply(403,"Forbidden auth ID"); exit; } if ($socket_in(proto) == "tcp" || $socket_in(proto) == "tls") setflag("TCP_PERSISTENT"); if (isflagset("NAT")) { setbflag("SIP_PING_FLAG"); } # store the registration and generate a SIP reply if (!save("location")){ sl_reply_error(); xlog("failed to register AoR $tu\n"); exit; } exit; } if ($rU==NULL) { # request with no Username in RURI send_reply(484,"Address Incomplete"); exit; } # apply DB based aliases alias_db_lookup("dbaliases"); # apply transformations from dialplan table dp_translate( 0, "$rU", $rU); # check if the clients are using WebSockets or WebSocketSecure if ($socket_in(proto) == "WS" || $socket_in(proto) == "WSS") setflag('SRC_WS'); else setflag('SRC_SIP'); # consider the client is behind NAT - always fix the contact fix_nated_contact(); if (is_method("REGISTER")) { # indicate that the client supports DTLS # so we know when he is called if (isflagset('SRC_WS')) setbflag('DST_WS'); fix_nated_register(); if (!save("location")) sl_reply_error(); exit; } # do lookup with method filtering if (!lookup("location","m")) { if (!db_does_uri_exist("$ru","subscriber")) { send_reply(420,"Bad Extension"); exit; } t_reply(404, "Not Found"); exit; } if (isbflagset("NAT")) setflag("NAT"); # when routing via usrloc, log the missed calls also do_accounting("db","missed"); route(relay); } route[relay] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { t_on_branch("handle_nat"); t_on_reply("handle_nat"); } else if (is_method("BYE|CANCEL")) { rtpengine_delete(); } if (!t_relay()) { send_reply(500,"Internal Error"); }; exit; } branch_route[handle_nat] { if (!is_method("INVITE") || !has_body("application/sdp")) return; if (isflagset('SRC_WS') && isbflagset('DST_WS')) $var(rtpengine_flags) = "ICE=force-relay DTLS=passive"; else if (isflagset('SRC_WS') && !isbflagset('DST_WS')) $var(rtpengine_flags) = "RTP/AVP replace-session-connection replace-origin ICE=remove"; else if (!isflagset('SRC_WS') && isbflagset('DST_WS')) $var(rtpengine_flags) = "UDP/TLS/RTP/SAVPF ICE=force"; else if (!isflagset('SRC_WS') && !isbflagset('DST_WS')) $var(rtpengine_flags) = "RTP/AVP replace-session-connection replace-origin ICE=remove"; rtpengine_offer("$var(rtpengine_flags)"); } onreply_route[handle_nat] { fix_nated_contact(); if (!has_body("application/sdp")) return; if (isflagset('SRC_WS') && isbflagset('DST_WS')) $var(rtpengine_flags) = "ICE=force-relay DTLS=passive"; else if (isflagset('SRC_WS') && !isbflagset('DST_WS')) $var(rtpengine_flags) = "UDP/TLS/RTP/SAVPF ICE=force"; else if (!isflagset('SRC_WS') && isbflagset('DST_WS')) $var(rtpengine_flags) = "RTP/AVP replace-session-connection replace-origin ICE=remove"; else if (!isflagset('SRC_WS') && !isbflagset('DST_WS')) $var(rtpengine_flags) = "RTP/AVP replace-session-connection replace-origin ICE=remove"; rtpengine_answer("$var(rtpengine_flags)"); } failure_route[missed_call] { if (t_was_cancelled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply(404,"Not found"); ## exit; ##} } local_route { if (is_method("BYE") && $DLG_dir=="UPSTREAM") { acc_db_request("200 Dialog Timeout", "acc"); } }
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
