Hi, It looks like the next message:
** ON ENTRY TO ZHPEV PARAMETER NUMBER 1 HAD AN ILLEGAL VALUE There is Paolo's comments on this: >ESSL contains a version of ZHPEV that is incompatible > with ZHPEV provided by LAPACK. If __AIX is defined, > the former is used. > Load ESSL before LAPACK. Try to follow this advice, i.e. recompile PWSCF with options -lessl -llapack. Bests, Eyvaz. --- Vivek Ranjan <vranjan at ncsu.edu> wrote: > Dear Users, > > I ran the attached input file on three different > machines with : (i) Xeon > processors, (ii) IBM p690, (iii) another machine > with IBM p690. I could > run the programme successfully on the first two, but > the run on the third > machine stopped with the following statement : > > > ------------------------------ iteration 1 > ------------------------ > tcpu = 0.1; self-consistency for image > 1 > ** ON ENTRY TO DSYGV PARAMETER NUMBER 2 HAD AN > ILLEGAL VALUE > > > -------------------------------------------------------------------- > > Usually everything is similar on the second and the > third machines > mentioned above. As a result the same makefile > works well on both of > them. I would also like to mention that I have > successfully performed many > calculations using PWSCF on all three machines. So, > my PWSCF compilation > seems to be alright. > > Any hints ? > > Thank you, > > Vivek > > __________________________________________________________________________ > web : http://www.geocities.com/vivekranjanweb > __________________________________________________________________________ > Vivek Ranjan Email : > vranjan at chips.ncsu.edu > Center for High Performance Simulation : > vranjan at ncsu.edu > Department of Physics > NC State University Phone : > +1-919-513-0613 (Office) > Campus Box 7518 Fax : > +1-919-513-4804 > Raleigh, NC 27695 > -------------------------------------------------------------------------- __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com
