Dear All, after getting strange error-messages, which might be related to lapack/blas ( DSYGV : 2538-2015 The number of elements (ARG NO. 11) in a work array must be greater than or equal to (2048). ) I'd like to use "our own" lapack/blas. Unfortunately QE won't find/accept them - what's the right way, to help it?
I tried: ./configure MPIF90=mpfort LIBDIRS="/gpfs/usrurz/lapack/lapack-3.2.1" with :/gpfs/usrurz/lapack/lapack-3.2.1> ls BLAS CCI_README Makefile README cci ccisrc.tar make.inc README_hh cci.log INSTALL make.inc.example SRC CCI_NOTES lapack_pwr6.a make.inc.old TESTING CCI_QUICK_INSTALL LICENSE make.log_pwr6_xlf_q64_cci tmglib_pwr6.a yielding a quite promising directory of an installed lapack/blas? But QE insists on its own libraries. The system is an IBM 575 with Power-Linux=SLES11_on_Power and the only information I found is this here: http://www2.fz-juelich.de/jsc/jump/usage/FAQ/essl/ Any ideas on this? Thanks a lot, Guntram
