Dear ?? , first of all I do suggest to try to run at least one iteration using the standard CPU-only pw.x. In principle if the CPU-only code works then QE-GPU can run (if the computation blows up or numbers are wrong... this is a different story).
On Mar 5, 2014, at 1:53 PM, ?? <somnusfish at gmail.com> wrote: > I get the following messages: >> [root at node >> 19 CHNO]# mpirun -np 2 ../bin/pw-gpu.x -in CHNO.scf.in > gup0.5.txt >> -------------------------------------------------------------------------- >> mpirun noticed that the job aborted, but has no info as to the process >> that caused that situation. >> ????????????????????????????????????? There are no real error messages, it is clear to understand what went wrong. Please recompile the code and send back the config.log (saved under GPU/install/). can you share more details about the hardware? One good best practice: >> [root at node19 CHNO]# mpirun -np 2 ../bin/pw-gpu.x -in CHNO.scf.in > >> gup0.95.txt Do not run as a root. Never. F -- Mr. Filippo SPIGA, M.Sc. http://www.linkedin.com/in/filippospiga ~ skype: filippo.spiga ?Nobody will drive us out of Cantor's paradise.? ~ David Hilbert ***** Disclaimer: "Please note this message and any attachments are CONFIDENTIAL and may be privileged or otherwise protected from disclosure. The contents are not to be disclosed to anyone other than the addressee. Unauthorized recipients are requested to preserve this confidentiality and to advise the sender immediately of any error in transmission."
