Dear Dr. Lurii,
Thanks for suggestion, I will try turboEELS. But I can find the input description of turbo_EELS . What is the meaning of q ? How can we get (x y z) 3 Polarization direction ? use the command ipol = 4 ? like the turbo_lanczos? Many thanks! Clarence PhD student Department of Physics and Materials Science City University of Hong Kong ________________________________ 发件人: [email protected] <[email protected]> 代表 Timrov Iurii <[email protected]> 发送时间: 2017年3月6日 22:43:42 收件人: [email protected] 主题: Re: [Pw_forum] Error in Turbo_lanczos.x to calculate the adsorption coefficiency Dear Clarence, When posting to pw_forum please do not forget to write your affiliation! > As far as I know, the turboTDDFT is not extended to metals, Yes, you are right. > So we should use fixed occupation in the scf calculation, right? Yes > However, if I use fixed occupation in scf, the error is > ' charge is wrong: smearing is needed '. Because the system considered is > odd electron. Then you have to use smearing. I think there is no workaround with turboTDDFT for metals: one has to extend it to metals. > What should I do to calculate the adsorption coefficiency of system with odd > electrons. aBsorption, not aDsorption Probably you may try to use turboEELS, which is extended to metals. Namely, use very small q (but not exactly zero) and plot the imaginary part of the dielectric function. HTH Iurii -- Dr. Iurii Timrov Postdoctoral Researcher Swiss Federal Institute of Technology Lausanne (EPFL) Laboratory of Theory and Simulation of Materials (THEOS) CH-1015 Lausanne, Switzerland ________________________________ From: [email protected] <[email protected]> on behalf of LEUNG Clarence <[email protected]> Sent: Monday, March 6, 2017 9:51 AM To: [email protected] Subject: [Pw_forum] Error in Turbo_lanczos.x to calculate the adsorption coefficiency Dear PWscf users, As far as I know, the turboTDDFT is not extended to metals, So we should use fixed occupation in the scf calculation, right? However, if I use fixed occupation in scf, the error is ' charge is wrong: smearing is needed '. Because the system considered is odd electron. What should I do to calculate the adsorption coefficiency of system with odd electrons. Many thanks, Clarence
_______________________________________________ Pw_forum mailing list [email protected] http://pwscf.org/mailman/listinfo/pw_forum
