Hi Paolo,
El 06/10/2017 a las 10:59, Paolo Giannozzi escribió:
$ grep finclude make.inc
IFLAGS = -I$(TOPDIR)/include -I$(TOPDIR)/FoX/finclude
-I../include/ -I/opt/intel/mkl/include
is $(TOPDIR)/FoX/finclude there, and does it contain compiled modules?
I see the cause of this problem. I was using, like for qe-6.1, the
following call to configure:
./configure --with-scalapack=intel ARCH=x86_64 F90=ifort MPIF90=mpiifort
LIBDIRS="/opt/intel/composer_xe_2015.1.133/mkl/lib/intel64
/opt/fftw-3.2.2/lib" IFLAGS="-I/opt/fftw-3.2.2/include -I../include"
This explains that, although $(TOPDIR)/FoX/finclude does contain many
modules,
$ grep finclude make.inc
gives nothing, as indeed in make.inc I have this:
IFLAGS = -I/opt/fftw-3.2.2/include -I../include
I thus have added -I../FoX/finclude to the configure call and that
problem disappears.
Now I find a new one, as I get these other errors:
pw_restart_new.f90(18): error #7002: Error in opening the compiled
module file. Check INCLUDE paths. [FOX_WXML]
USE qes_module
------^
pw_restart_new.f90(142): error #6618: The INTERFACE/CONTAINS stack is
full. This means that modules are being 'used' in a circular way.
[QES_LIBS_MODULE]
ALLOCATE( ngk_g( nkstot ) )
^
pw_restart_new.f90(142): error #6618: The INTERFACE/CONTAINS stack is
full. This means that modules are being 'used' in a circular way.
[FOX_WXML]
ALLOCATE( ngk_g( nkstot ) )
^
pw_restart_new.f90(116): error #7002: Error in opening the compiled
module file. Check INCLUDE paths. [FOX_WXML]
USE qexsd_input, ONLY : qexsd_init_k_points_ibz,
qexsd_init_occupations, qexsd_init_smearing
----------^
pw_restart_new.f90(696): error #6618: The INTERFACE/CONTAINS stack is
full. This means that modules are being 'used' in a circular way.
[FOX_WXML]
ierr = 0
^
pw_restart_new.f90(677): error #7002: Error in opening the compiled
module file. Check INCLUDE paths. [FOX_WXML]
USE qes_libs_module, ONLY : qes_write_input,
qes_write_output, qes_write_parallel_info, &
----------^
I verified that qes_module.mod does appear in Modules directory. Which
can be the problem then?
Regards,
--
José C. Conesa
Instituto de Catálisis y Petroleoquímica, CSIC
Marie Curie 2, Madrid, Spain
www.icp.csic.es
Tel. (+34)915854766
_______________________________________________
Pw_forum mailing list
Pw_forum@pwscf.org
http://pwscf.org/mailman/listinfo/pw_forum
