On Wed, Apr 1, 2020 at 8:27 AM <[email protected]> wrote:
Maybe the manual is not very clear.
>
or maybe it is clear but wrong: for plot_num=3, it says
emax upper boundary of energy grid (in eV).
If not specified, LDOS is computed just for energy
emin
Paolo
The ldos is always computed from emin to emax. If you specify values for
> emin or emax, the program will use them; otherwise it assumes the lowest
> and highest computed levels as emin and emax.
> Hope it helps
> Pietro
>
>
>
>
>
> Il 1 apr 2020 6:17 AM, Christoph Wolf <[email protected]> ha
> scritto:
>
> Dear all,
>
> I think pp.x does not follow the rule printed in the manual in the latest
> version 6.5. The manual says that if emax is not specified the LDOS will
> only be integrated for emin, however in my test it still calculates it for
> other energies as well:
>
> &inputpp
> prefix = "agmgofe",
> outdir = "./tmp",
> plot_num=3,
> filplot = "wf.dat"
> * emin = -.8283*
> degauss_ldos = 0.1 ! in eV !
> /
>
>
> output:
>
> Calling punch_plot, plot_num = 3
>
> Energy = -0.82830 eV, broadening = 0.10000eV
> Writing data to file wf.dat001
>
> Calling punch_plot, plot_num = 3
>
> Energy = -0.72830 eV, broadening = 0.10000eV
> Writing data to file wf.dat002
>
> Calling punch_plot, plot_num = 3
>
> Energy = -0.62830 eV, broadening = 0.10000eV
> Writing data to file wf.dat003
>
> Calling punch_plot, plot_num = 3
>
> Energy = -0.52830 eV, broadening = 0.10000eV
> Writing data to file wf.dat004
>
> Calling punch_plot, plot_num = 3
>
> Energy = -0.42830 eV, broadening = 0.10000eV
> Writing data to file wf.dat005
>
> Calling punch_plot, plot_num = 3
>
> Energy = -0.32830 eV, broadening = 0.10000eV
> Writing data to file wf.dat006
>
> Calling punch_plot, plot_num = 3
>
> Energy = -0.22830 eV, broadening = 0.10000eV
> Writing data to file wf.dat007
>
> ...
>
> until it reaches Ef. Seems like emax also defaults to Ef
>
> to avoid this behavior emax has to be set to the same as emin.
>
> Best,
> Chris
> --
> Postdoctoral Researcher
> Center for Quantum Nanoscience, Institute for Basic Science
> Ewha Womans University, Seoul, South Korea
>
>
> _______________________________________________
> Quantum ESPRESSO is supported by MaX (www.max-centre.eu/quantum-espresso)
> users mailing list [email protected]
> https://lists.quantum-espresso.org/mailman/listinfo/users
--
Paolo Giannozzi, Dip. Scienze Matematiche Informatiche e Fisiche,
Univ. Udine, via delle Scienze 208, 33100 Udine, Italy
Phone +39-0432-558216, fax +39-0432-558222
_______________________________________________
Quantum ESPRESSO is supported by MaX (www.max-centre.eu/quantum-espresso)
users mailing list [email protected]
https://lists.quantum-espresso.org/mailman/listinfo/users
