I've attached the NIC config file and also pasted it to http://paste.openstack.org/show/626557/
On Thu, Nov 16, 2017 at 9:05 PM Dan Sneddon <dsned...@redhat.com> wrote: > On Wed, Nov 15, 2017 at 2:41 PM, Samuel Monderer < > smonde...@vasonanetworks.com> wrote: > >> Hi, >> >> I managed to deploy a compute node with ovs-dpdk using two NICs. The >> first for the provisioning network and control plane, the other NIC is used >> tenant network over ovs-dpdk. >> >> I then tried to use only a single nic for provisioning and ovs-dpdk. >> I used the nic configuration below for the compute nodes running ovs-dpdk >> but encountered two problems. >> First the tenant network was working (wasn't able to get DHCP running and >> even when I manually configured it wasn't able to reach the router) >> Second the default route on control plane is not set even though it is >> configured in /etc/sysconfig/network-scripts/route-br-ex >> >> Samuel >> >> OsNetConfigImpl: >> type: OS::Heat::StructuredConfig >> properties: >> group: os-apply-config >> config: >> os_net_config: >> network_config: >> - >> type: ovs_user_bridge >> name: {get_input: bridge_name} >> use_dhcp: false >> dns_servers: {get_param: DnsServers} >> addresses: >> - >> ip_netmask: >> list_join: >> - '/' >> - - {get_param: ControlPlaneIp} >> - {get_param: ControlPlaneSubnetCidr} >> routes: >> - >> ip_netmask: 169.254.169.254/32 >> next_hop: {get_param: EC2MetadataIp} >> - >> default: true >> next_hop: {get_param: ControlPlaneDefaultRoute} >> members: >> - >> type: ovs_dpdk_port >> name: dpdk0 >> members: >> - >> type: interface >> name: nic1 >> - >> type: vlan >> vlan_id: {get_param: InternalApiNetworkVlanID} >> addresses: >> - >> ip_netmask: {get_param: InternalApiIpSubnet} >> - >> type: vlan >> vlan_id: {get_param: TenantNetworkVlanID} >> addresses: >> - >> ip_netmask: {get_param: TenantIpSubnet} >> >> _______________________________________________ >> users mailing list >> users@lists.rdoproject.org >> http://lists.rdoproject.org/mailman/listinfo/users >> >> To unsubscribe: users-unsubscr...@lists.rdoproject.org >> >> > Samuel, > > Can you attach an unmodified version of this NIC config, rather than > copy/paste into the email? > > I think you have an issue here: > > members: > - > type: ovs_dpdk_port > name: dpdk0 > members: > - > type: interface > name: nic1 > > It appears that you have the ovs_dpdk_port as a member of the user bridge, > but then you have the NIC and the VLANs as members of the ovs_dpdk_port, > but the VLANs should be members of the bridge, not the ovs_dpdk_port. > > But that might not be the case, which is why I would like to see the > original unmodifed NIC config. > > -- > Dan Sneddon | Senior Principal OpenStack Engineer > dsned...@redhat.com | redhat.com/openstack > dsneddon:irc | @dxs:twitter >
ComputeOvsDpdk.yaml
Description: application/yaml
_______________________________________________ users mailing list users@lists.rdoproject.org http://lists.rdoproject.org/mailman/listinfo/users To unsubscribe: users-unsubscr...@lists.rdoproject.org