This error is caused by an xfs file system with ftype=0. You need ftype=1 for the container file system to work correctly. ftype=1 was the default setting when formatting a filesystem starting with CentOS/RHEL 7.3. If you're starting by using a cloud image, make sure its a recent one.
https://bugs.launchpad.net/tripleo/+bug/1765121 https://bugzilla.redhat.com/show_bug.cgi?id=1564671 On Thu, Jun 20, 2019 at 2:59 AM Alfredo Moralejo Alonso <[email protected]> wrote: > Hi, > > What version of CentOS are you using for the underlying OS in the > undercloud and how did you deploy it? > > Best regards, > > Alfredo > > > On Thu, Jun 20, 2019 at 10:47 AM Pradeep Antil <[email protected]> > wrote: > >> Hi Folks, >> >> I am trying to install undercloud on CentOS 7 VirtualBox VM. Two Nics are >> assigned to VM, first NIC is used for Provisioning N/w(192.168.56.0/24) >> and second is used for internet (NAT - 10.0.3.15) >> >> When i try to install undercloud using below command, getting the >> following error, >> >> Any idea and suggestion to resolve the error. >> >> [stack@undercloud ~]$ openstack undercloud install >> >> TASK [Restart Keepalived container] >> ******************************************************************************************* >> fatal: [undercloud]: FAILED! => {"changed": true, "cmd": "podman restart >> keepalived", "delta": "0:00:00.090226", "end": "2019-06-20 >> 03:50:58.583423", "msg": "non-zero return code", "rc": 125, "start": >> "2019-06-20 03:50:58.493197", "stderr": "Error: error creating libpod >> runtime: kernel does not support overlay fs: overlay: the backing xfs >> filesystem is formatted without d_type support, which leads to incorrect >> behavior. Reformat the filesystem with ftype=1 to enable d_type support. >> Running without d_type is not supported.: driver not supported", >> "stderr_lines": ["Error: error creating libpod runtime: kernel does not >> support overlay fs: overlay: the backing xfs filesystem is formatted >> without d_type support, which leads to incorrect behavior. Reformat the >> filesystem with ftype=1 to enable d_type support. Running without d_type is >> not supported.: driver not supported"], "stdout": "", "stdout_lines": []} >> ...ignoring >> >> [stack@undercloud ~]$ df -Th >> Filesystem Type Size Used Avail Use% Mounted on >> /dev/mapper/centos-root xfs 31G 2.3G 29G 8% / >> devtmpfs devtmpfs 3.9G 0 3.9G 0% /dev >> tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm >> tmpfs tmpfs 3.9G 8.7M 3.9G 1% /run >> tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup >> /dev/sda1 xfs 497M 141M 356M 29% /boot >> tmpfs tmpfs 782M 0 782M 0% /run/user/0 >> tmpfs tmpfs 500M 36M 465M 8% >> /var/log/heat-launcher >> [stack@undercloud ~]$ free -h >> total used free shared buff/cache >> available >> Mem: 7.6G 232M 5.7G 44M 1.7G >> 7.0G >> Swap: 3.5G 0B 3.5G >> [stack@undercloud ~]$ >> >> [stack@undercloud ~]$ cat ~/undercloud.conf >> # Config generated by undercloud wizard >> # Use these values in undercloud.conf >> [DEFAULT] >> undercloud_hostname = undercloud.localdomain >> local_interface = enp0s3 >> local_mtu = 1500 >> local_ip = 192.168.56.2/24 >> undercloud_public_host = 192.168.56.3 >> undercloud_admin_host = 192.168.56.4 >> undercloud_service_certificate = >> generate_service_certificate = True >> scheduler_max_attempts = 10 >> >> # Deprecated names for compatibility with older releases >> discovery_iprange = 192.168.56.16,192.168.56.20 >> undercloud_public_vip = 192.168.56.3 >> undercloud_admin_vip = 192.168.56.4 >> network_cidr = 192.168.56.0/24 >> dhcp_start = 192.168.56.6 >> dhcp_end = 192.168.56.15 >> inspection_iprange = 192.168.56.16,192.168.56.20 >> network_gateway = 192.168.56.1 >> #masquerade_network = 192.168.56.0/24 >> # End of deprecated names >> >> [ctlplane-subnet] >> cidr = 192.168.56.0/24 >> gateway = 192.168.56.1 >> dhcp_start = 192.168.56.6 >> dhcp_end = 192.168.56.15 >> inspection_iprange = 192.168.56.16,192.168.56.20 >> #masquerade = true >> >> [stack@undercloud ~]$ >> >> -- >> Best Regards >> Pradeep Kumar >> _______________________________________________ >> users mailing list >> [email protected] >> http://lists.rdoproject.org/mailman/listinfo/users >> >> To unsubscribe: [email protected] >> > _______________________________________________ > users mailing list > [email protected] > http://lists.rdoproject.org/mailman/listinfo/users > > To unsubscribe: [email protected] >
_______________________________________________ users mailing list [email protected] http://lists.rdoproject.org/mailman/listinfo/users To unsubscribe: [email protected]
