Hi Chris,
you can try this rebuild kernel from fedora FC18-arm
(http://linux.chester.at/raspberrypi-kernel-3.6.11-2.20130205gitc5cb0b5.el6.armv6l.rpm)
I tried using ISCSI and it worked fine ...
regards
mIke
Ps:
# yum -y install iscsi-initiator-utils
# iscsiadm -m discovery -t sendtargets -p server01.chester.at
192.168.192.10:3260,1 iqn.2001-13.at.chester:storage.rasp_iscsi
# iscsiadm -m node --login
Logging in to [iface: default, target:
iqn.2001-13.at.chester:storage.rasp_iscsi, portal: 192.168.192.10,3260]
Login to [iface: default, target:
iqn.2001-13.at.chester:storage.rasp_iscsi, portal: 192.168.192.10,3260]
successful.
# iscsiadm -m session show
tcp: [2] 192.168.192.10:3260,1 iqn.2001-13.at.chester:storage.rasp_iscsi
# dmesg
[523604.724047] sd 0:0:0:1: [sda] Synchronizing SCSI cache
[523604.982161] connection1:0: detected conn error (1020)
[693099.971433] scsi1 : iSCSI Initiator over TCP/IP
[693100.262591] scsi 1:0:0:0: RAID IET Controller
0001 PQ: 0 ANSI: 5
[693100.269043] scsi 1:0:0:0: Attached scsi generic sg0 type 12
[693100.278534] scsi 1:0:0:1: Direct-Access IET VIRTUAL-DISK
0001 PQ: 0 ANSI: 5
[693100.285216] sd 1:0:0:1: Attached scsi generic sg1 type 0
[693100.323626] sd 1:0:0:1: [sda] 2097152 512-byte logical blocks: (1.07
GB/1.00 GiB)
[693100.337959] sd 1:0:0:1: [sda] Write Protect is off
[693100.338000] sd 1:0:0:1: [sda] Mode Sense: 49 00 00 08
[693100.343312] sd 1:0:0:1: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[693100.379001] sda: unknown partition table
[693100.401206] sd 1:0:0:1: [sda] Attached SCSI disk
# iscsiadm -m node --logout
Logging out of session [sid: 2, target:
iqn.2001-13.at.chester:storage.rasp_iscsi, portal: 192.168.192.10,3260]
Logout of [sid: 2, target: iqn.2001-13.at.chester:storage.rasp_iscsi,
portal: 192.168.192.10,3260] successful.
# iscsiadm -m session show
iscsiadm: No active sessions.
_______________________________________________
users mailing list
[email protected]
http://lists.redsleeve.org/mailman/listinfo/users
