Dear Rafael,

thank you for the example.

One comment:

before mputl(tx,fd)

I had to use:

tx = [tx1+tx2]    --> 3 x 1 matrix

instead of

tx = [tx1 tx2]   --> 3 x 2 matrix, does not work with mputl

However,
thanks for the solution.
Philipp



2016-10-14 13:28 GMT+02:00 Rafael Guerra <jrafaelbgue...@hotmail.com>:

> NOTE:  fyi, after testing over very large text files, it happens that
> doing *mputl* of  ‘tx’ to disk followed by *M=fscanfMat *is much faster
> than doing simply*  M=evstr(tx) *…
>
>
>
>
>
> *From:* users [mailto:users-boun...@lists.scilab.org] *On Behalf Of *Rafael
> Guerra
> *Sent:* Friday, October 14, 2016 12:58 PM
>
> *To:* Users mailing list for Scilab <users@lists.scilab.org>
> *Subject:* Re: [Scilab-users] using csvRead
>
>
>
> *Correction:*  after having obtained ‘tx’ as below, just do:    M=evstr(tx
> );
>
>
>
> *From:* users [mailto:users-boun...@lists.scilab.org
> <users-boun...@lists.scilab.org>] *On Behalf Of *Rafael Guerra
> *Sent:* Friday, October 14, 2016 12:53 PM
> *To:* Users mailing list for Scilab <users@lists.scilab.org>
> *Subject:* Re: [Scilab-users] using csvRead
>
>
>
> Hello Philipp,
>
>
>
> Say that after *mopen* you got all your text input into array of strings
> ‘txt’:
>
>
>
> txt = [
>
> "HEADER-Line",
>
> "01.12.2015, 01:15:00.12, 1.1, -2.2";
>
> "03.12.2015, 11:15:00.12, -11.1, 2.5";
>
> "12.12.2015, 21:15:00.12, 5.1, 6.2"];
>
>
>
> Then do the following:
>
>
>
> tx=txt(2:$);              // get rid of header line
>
> tx1=part(tx,1:24);  // get date and time
>
> tx2=part(tx,25:$);  // get numeric data values
>
> // Now get rid of separators:
>
> tx1 = strsubst(tx1,'.',' ');
>
> tx1 = strsubst(tx1,':',' ');
>
> tx1 = strsubst(tx1,',',' ');
>
> tx2 = strsubst(tx2,',',' ');
>
> tx = [tx1 tx2]; // regroups all data but now with numeric values only
>
>
>
> Use  *mputl* to output ‘tx’ to temporary disk file and use *fscanfMat* to
> read like a breeze the large disk file (now fully numeric) into a Scilab
> numeric matrix ‘M’.
>
>
>
> Regards,
>
> Rafael
>
>
>
> *From:* users [mailto:users-boun...@lists.scilab.org
> <users-boun...@lists.scilab.org>] *On Behalf Of *Philipp Mühlmann
> *Sent:* Friday, October 14, 2016 11:50 AM
> *To:* Users mailing list for Scilab <users@lists.scilab.org>
> *Subject:* Re: [Scilab-users] using csvRead
>
>
>
> Dear Denis,
>
>
>
> yes thats the way I do it right now.
>
>
>
> use mopen --> open file for reading
>
> use mgetl --> read data, result = array of strings
>
> use strsplit --> split  string Array as desired
>
>
>
> use evestring() --> convert string to double
>
>
>
> Point of disadvantage
>
>
>
> So fa I know strsplit() can handle only one string.
>
> Hence I use a for-loop to split each line of the Initial string array into
> a group of strings and convert each part into a double.
>
>
>
> OK for few data...may take long for many data
>
>
>
> Idea:
>
> Read data from file and try to spare conversation string-to-double.
>
> fscanfMat() won't do it, because the data does not contain only numerical
> values and "."-sign as decimal.
>
> So I tried csvRead.
>
> using the help I find:      separator :  a 1-by-1 matrix of strings, the
> field separator used.
>
>
>
> Note:   STRINGS   = plural.
>
>
>
> So I wonder if it is possible to have more than one separator here.
>
>
>
> BR
>
> Philipp
>
>
>
> mclose( :-) )
>
>
>
>
>
> _______________________________________________
> users mailing list
> users@lists.scilab.org
> http://lists.scilab.org/mailman/listinfo/users
>
>


-- 
In Kanada is' ka' na' da. Sonst wär' Kanada Jemanda.

There we have the salad.
_______________________________________________
users mailing list
users@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/users

Reply via email to