Dear Scilab users and developers! I have installed Scilab 6.0 x86 and x86_64 on my Windows 8.1 x86_64 laptop.
Also I have downloaded and installed gcc-6.2.0 for x86 <http://atoms.scilab.org/toolboxes/mingw/0.10.0/files/gcc-6.2.0-32.exe> and x86_64 <http://atoms.scilab.org/toolboxes/mingw/0.10.0/files/gcc-6.2.0-64.exe> as prerequisites of MingGw toolbox <https://atoms.scilab.org/toolboxes/mingw/0.10.0>. Then I installed MinGw toolbox in Scilabs with atomsInstall('mingw'). This process was successful. Then I restarted Scilab and tried to test MinGw toolbox with atomsTest('mingw'). The results are not good - on both x86 and x86_64 - 13 tests of 15 are failed. Only *G_make* and *dllinfo* are passed. I do not attach logs - the error is always the same "failed: Slave Scilab exited with error code 1 ". If I launch these unit-tests manually (with cd SCIHOME\atoms\x64\mingw\0.10. 0\tests\unit_tests\ and corresponding exec *.tst ) I got messages such as WARNING: C:\Users\nikolay\AppData\Roaming\Scilab\SCILAB~2.0\ atoms\x64\mingw\010~1.0\macros\scripts\TEMPLATE_MAKEFILE.MINGWnot found. make: *** No rule to make target 'all'. Stop. at line 25 of function dlwCompile ( C:\Users\nikolay\AppData\ Roaming\Scilab\SCILAB~2.0\atoms\x64\mingw\010~1.0\macros\windows\dlwCompile.sci line 34 ) at line 70 of function ilib_compile ( C:\Program Files\scilab-6.0.0\modules\dynamic_link\macros\ilib_compile.sci line 86 ) at line 129 of function ilib_build ( C:\Program Files\scilab-6.0.0\modules\dynamic_link\macros\ilib_build.sci line 142 ) at line 17 of executed file C:\Users\nikolay\AppData\ Roaming\Scilab\scilab-6.0.0\atoms\x64\mingw\0.10.0\tests\ unit_tests\addinter.tst ilib_compile: Error while executing Makelib. Also I tried to launch Xcos model with Modelica blocks with xcos("SCI/modules/xcos/demos/Electrical/Bridge_Rectifier.zcos"); then with Simulation->Start got error in console --> xcos("SCI/modules/xcos/demos/Electrical/Bridge_Rectifier.zcos"); --------------------------------------------\ Main Modelica : C:\Users\nikolay\AppData\Local\Temp\SCI_TMP_6052_26419\ Bridge_Rectifier_im.mo Flat Modelica : C:\Users\nikolay\AppData\Local\Temp\SCI_TMP_6052_26419\ Bridge_Rectifier_imf.mo Simulation C code :C:\Users\nikolay\AppData\Local\Temp\SCI_TMP_6052_26419\ Bridge_Rectifier_im.c Generate a loader file Generate a Makefile WARNING: C:\Users\nikolay\AppData\Roaming\Scilab\SCILAB~2.0\ atoms\mingw\010~1.0\macros\scripts\TEMPLATE_MAKEFILE.MINGWnot found. Running the Makefile Compilation of Bridge_Rectifier_im.obj Building shared library (be patient) make: *** No rule to make target 'clean'. Stop. !sorry compiling problem ! ! ! !ilib_compile: Error while executing Makelib. ! c_pass1: build the modelica meta-block failed xcos_simulate: Error during block parameters update. After manual move of 'scripts/TEMPLATE_MAKEFILE.MINGW' to 'macros/scripts/TEMPLATE_MAKEFILE.MINGW' atomsTest('mingw') reports 10 passed tests (failed are: *addinter, ilib_build, ilib_build_2, ilib_build_cpp, links*). But Xcos models with Modelica blocks can be simulated except 2 crashes (*Ball on a Platform* and *Chaos Modelica*) Scilab 5.5.2 (x86 and x86_64) works normally on the same machine with mingw-0.9.3 (and gcc-4.6.3). Where is an error - in Scilab or in MinGw toolbox? Should I report bug? -- *With best regards,Ph.D., assistant professor at MPEI <http://mpei.ru/lang/en/Pages/default.aspx>,IEEE member,maintainer of Mathieu functions toolbox for Scilab <http://atoms.scilab.org/toolboxes/Mathieu/>,Nikolay Strelkov.*
_______________________________________________ users mailing list users@lists.scilab.org http://lists.scilab.org/mailman/listinfo/users
