Dear list
I tried to setup a VPN connection between the iPhone and my linux server. The
tunnel builds up successfully using PSK or certificates (thanks to Michael
Niehren for
http://www.mail-archive.com/[email protected]/msg00798.html).
But I cannot get any connection running over that tunnel. Using tcpdump on the
gateway, I can see the incoming ping packets getting sent to the iphone as
encrypted packets, but there is no answer coming back.
When I try to brows the lan/web from the iPhone, nothing is being sent to the
vpn gateway. There's just a "Cannot open page" message displayed, although the
connection is showed as working.
I'm using PSK+XAUTH with strongSwan 4.3.2 and pluto/ikev1.
What could the problem be? Any hints on troubleshooting?
Any help is highly appreciated. Thanks in advance.
Tom
Here's my ipsec.conf
config setup
plutodebug=none
uniqueids=yes
nat_traversal=yes
plutostart=yes
interfaces="%defaultroute"
conn %default
authby=rsasig
leftrsasigkey=%cert
rightrsasigkey=%cert
keyingtries=1
keylife=20m
ikelifetime=240m
conn psk
auto=add
dpdaction=clear
authby=xauthpsk
xauth=server
pfs=no
left=192.168.0.40
leftsubnet=0.0.0.0/0
right=%any
rightsourceip=172.17.0.2
--
Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief!
Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
