Hello Gary, using certificates Openswan should smoothly interoperate smoothly with strongSwan (actually I'm the author of the X.509 Openswan code). The configuration should be more or less identical to strongSwan's.
Best regards Andreas On 02/25/2011 06:16 PM, Gary Smith wrote: > After finally getting my 3 segment network setup, I discovered that > one of my road warrior clients was actually a static client that was > never really configured properly. This box is running centos 5.x with > openswan (Linux Openswan U2.6.24/K2.6.24-23-xen (netkey)). I need to > be able to get this node talking to the one of the segments in the 3 > segment network. > > What are my options here? I'd install strongSwan in place of > openswan, but I can't seem to find any RPM packages for it. > > I've tried implementing X509, but the documentation for openswan and > it's samples are severely lacking. The endpoints (3 segments that > work) are strongSwan 4.5. > > Suggestions? > > Gary Smith ====================================================================== Andreas Steffen [email protected] strongSwan - the Linux VPN Solution! www.strongswan.org Institute for Internet Technologies and Applications University of Applied Sciences Rapperswil CH-8640 Rapperswil (Switzerland) ===========================================================[ITA-HSR]== _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
