Hello, you can do this with strongswan-4.5.3 by defining a pass shunt policy for the local net as shown in the following example scenario:
http://www.strongswan.org/uml/testresults/ikev2/shunt-policies/ Regards Andreas On 08/25/2011 02:34 AM, Christ Schlacta wrote: > is it possible to configure Strongswan + IKEv2 using charon as per usual > in roadwarrior mode to specify that the networks to be accessible across > the IKEv2 tunnel are to be ALL networks except the right hand subnet as > it is known to the right side at the point in time of connection? I > connect from numerous networks, and would like to be able to browse the > local network with all traffic beyond the current subnet being sent > along the VPN. ====================================================================== Andreas Steffen [email protected] strongSwan - the Linux VPN Solution! www.strongswan.org Institute for Internet Technologies and Applications University of Applied Sciences Rapperswil CH-8640 Rapperswil (Switzerland) ===========================================================[ITA-HSR]== _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
