Hello,
I have installed the following packages on a OpenSuSE 11.4 system:
strongswan-ipsec-4.5.0-6.7.1.i586
strongswan-mysql-4.5.0-6.7.1.i586
strongswan-ikev2-4.5.0-6.7.1.i586
strongswan-nm-4.5.0-6.7.1.i586
strongswan-libs0-4.5.0-6.7.1.i586
strongswan-4.5.0-6.7.1.i586
strongswan-sqlite-4.5.0-6.7.1.i586
strongswan-ikev1-4.5.0-6.7.1.i586
strongswan-doc-4.5.0-6.7.1.i586
When I enter /etc/init.d/ipsec start, /var/log/messages contains the following
lines:
Sep 21 16:15:10 gw pluto[32596]: added connection description "LD-B2"
Sep 21 16:15:10 gw pluto[32596]: |
192.168.13.0/24===91.45.xxx.xxx[gateway.b2.de]---217.0.xxx.xxx...217.7.xxx.xx[gateway.landau.de]===192.168.0.0/24
Sep 21 16:15:10 gw pluto[32596]: | ike_life: 10800s; ipsec_life: 3600s;
rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 0; policy:
PSK+ENCRYPT+TUNNEL+PFS
Sep 21 16:15:10 gw pluto[32596]: | next event EVENT_REINIT_SECRET in 3599
seconds
And that's it! Why does Pluto only add the connection but does not start it,
although I have defined "auto=start" in ipsec.conf?
Here are the two configuration files:
/etc/ipsec.conf
config setup
interfaces="%defaultroute"
plutostart=yes
plutodebug=all
uniqueids=yes
charonstart=no
conn Landau-Bruchsal2
keyingtries=0
type=tunnel
pfs=yes
authby=secret
left=217.7.xxx.xx
[email protected]
leftsubnet=192.168.0.0/24
right=%defaultroute
[email protected]
keyexchange=ikev2
rightsubnet=192.168.13.0/24
auto=start
/etc/strongswan.conf
charon {
}
pluto {
}
libstrongswan {
}
Thanks for any suggestions or hints,
Stefan
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
