Thanks Andreas.
Yes, I saw that - and I'll probably use that functionality for a separate set
of requirements. Unfortunately for this particular instance, the customer has
decreed "No VPNs" - I think partly for support reasons within their own
organisation.
Which is why I was hoping to use the security connection profiles function
instead, not because the underlying technology is different, but because the
end user experience is, with the connection profile configured on the windows
client, the ipsec connection is setup automatically without the user being
aware of it.
I'm going to test windows -> windows as well, to see if I can make that work,
and if not it's back to the drawing board. :-)
Thanks,
Tristan
Tristan Ball - Hosted Services Manager VIC
Pronto Hosted Services
20 Lakeside Drive, Burwood East, VIC 3151
Phone: +61 3 9887 7770 | Email: [email protected]
Mobile: +61 408 397 473
For PHS helpdesk support, please email [email protected]
For urgent after hours support phone: 1800 622 556
---Legal Notice---
The email message and any attachments are confidential and subject to
copyright. If you are not the intended recipient, any use, interference with,
disclosure or copying of this material is unauthorised and prohibited. No part
may be reproduced, adapted or transmitted without the written permission of the
copyright owner. If you have received this email in error, please immediately
advise the sender by return email and delete the message from your system.
Before opening or using attachments, check for viruses and defects. Our
liability is limited to re-supplying any affected attachments.
-----Original Message-----
From: Andreas Steffen [mailto:[email protected]]
Sent: Thursday, 6 October 2011 7:21 AM
To: Tristan Ball
Cc: Ariel; [email protected]
Subject: Re: [strongSwan] Transport mode for Windows Vista/7 RoadWarriors?
Hello Tristan,
The Windows 7 Agile VPN client has great IKEv2 support which allows the
installation of a virtual IP via the IKEv2 configuration payload.
Please have a look at our Win7 <-> strongSwan HOWTO:
http://wiki.strongswan.org/projects/strongswan/wiki/Windows7
Kind regards
Andreas
On 10/05/2011 05:27 PM, Tristan Ball wrote:
> I've had a play with tunnel mode as well, but windows 7 doesn't seem
> to support pushing IP's to the client via modecfg, and I'm not sure
> that would work around the issue anyway :-)
======================================================================
Andreas Steffen [email protected]
strongSwan - the Linux VPN Solution! www.strongswan.org
Institute for Internet Technologies and Applications University of Applied
Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
