Greetings, I am running tests with User-Mode Linux. I face the problem that if I start both pluto and charon then charon can never establish connection. Tcpdump at both ends indicate the response does come back but charon just can't receive it. I can also see in syslog that pluto is receiving message from the far-end. If I put "plutostart=no" in ipsec.conf than things work normally. "lsof" shows both pluto and charon are listening on port 500.
I am currently trying Debian 6.0.3 root filesystem but I have previously used the Gentoo filesystem downloaded from StrongSwan UML site with same results. Can someone explain what's going on? Here is the syslog showing pluto received the response message but charon got nothing: Jan 31 22:18:07 station01 charon: 05[IKE] retransmit 5 of request with message ID 0 Jan 31 22:18:07 station01 charon: 05[NET] sending packet: from 192.168.18.1[500] to 192.168.3.195[500] Jan 31 22:18:07 station01 charon: 14[NET] sending packet: from 192.168.18.1[500] to 192.168.3.195[500] Jan 31 22:18:07 station01 pluto[1578]: | Jan 31 22:18:07 station01 pluto[1578]: | *received 376 bytes from 192.168.3.195:500 on eth0 Jan 31 22:18:07 station01 pluto[1578]: | next event EVENT_REINIT_SECRET in 3086 seconds Jan 31 22:19:23 station01 charon: 02[IKE] giving up after 5 retransmits Jan 31 22:19:23 station01 charon: 02[IKE] peer not responding, trying again (3/0) Thanks for help. Simon _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
