Hi Chester, > I am using strongswan-4.2.8, I have a question want to check you, does > this version have support IP range like 192.168.2.3-192.168.2.233 when > set to left|right side?
No, we currently don't support arbitrary address ranges. Such ranges are simply mapped to the smallest subnet containing at least all the addresses (192.168.2.0/24 in your case). > If not does any one have an idea to implement it? You have to manually split your range into multiple subnets and use these in left|rightsubnet. For your range this would give you a list of 10 subnets: 192.168.2.3/32, 192.168.2.4/30, 192.168.2.8/29, 192.168.2.16/28, 192.168.2.32/27, 192.168.2.64/26, 192.168.2.128/26, 192.168.2.192/27, 192.168.2.224/29, 192.168.2.232/31 I just added a ticket for this [1], so we will probably add support for address ranges in one of our next releases. Regards, Tobias [1] http://wiki.strongswan.org/issues/173 _______________________________________________ Users mailing list Users@lists.strongswan.org https://lists.strongswan.org/mailman/listinfo/users