Hello Christ, there is no problem running the pluto IKEv1 daemon and the charon IKEv2 daemon concurrently. pluto will use the IKE UDP ports 500 and 4500 and charon will use a raw socket to filter out all IKEv2 messages. Have a look at our mixed IKEv1/IKEv2 protocol scenario:
www.strongswan.org/uml/testresults/ike/rw-cert/ Best regards Andreas On 02/10/2012 07:25 PM, Christ Schlacta wrote: > I've read about some issues using both Pluto and Charon together. > Currently I'm using Charon to provide IKEv2 for laptop users, but would > like to add IKEv1 + xauth for android users. Can both of these be > accomplished using Charon, or will I run into port sharing issues with > Pluto and Charon when I try to enable IKEv1 + xauth ? > If I will run into issues, what documents from the official website will > be useful, and what sections of documentation might be useful in general > for my intended setup? Nothing popped as being relevant. None of the > UML test scenarios are filed under IKEv1 & IKEv2 together ====================================================================== Andreas Steffen [email protected] strongSwan - the Linux VPN Solution! www.strongswan.org Institute for Internet Technologies and Applications University of Applied Sciences Rapperswil CH-8640 Rapperswil (Switzerland) ===========================================================[ITA-HSR]== _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
