> # Add connections here. > conn android > #authby=psk > authby=xauthpsk > xauth=server > keyexchange=ikev1 > #type=tunnel > type=transport > left=192.168.51.101 > #leftsubnet=0.0.0.0/0
you shouldn't comment this out, the Android client expects 0.0.0.0/0 on the other side. > leftnexthop=%defaultroute > right=%any > #rightsubnet=0.0.0.0/0 > rightnexthop=%defaultroute > rightsourceip=192.168.61.5/25 This is not how the Android client expects it. Use "modeconfig=push" and add an ip pool for the client to use (like "rightsourceip=%poolname"). Then you can use the ipsec pool command to add some IPs to your pool (see the strongswan wiki how to use it). Also you should upgrade to strongswan 4.6.3 as it includes a patch to make Xauth with Android work. > This is the end of the pluto.log file .. you probably also want to take a look at the Android side of the log. You can either get the log with adb or install a small log forwarding tool on your Android device. I can recommend SendLog by Neil Boyd for this, just search for it on the Play market. Kind regards, Gerd _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
