Hi Terry, we have a single example for multiple authentication:
http://www.strongswan.org/uml/testresults/ikev2/mult-auth-rsa-eap-sim-id/ And here is the nearly equal scenario with a single round of authentication http://www.strongswan.org/uml/testresults/ikev2/rw-eap-sim-only-radius/ Kind regards Andreas On 06/02/2012 12:41 AM, T Cheung wrote: > Hi, > > I've been trying to configure second authentication. Somehow I wasn't able > to find any example of it, even though ipsec.conf instructions contain bits > and pieces on this. > > As far as I can understand so far, I think the only relevent info is in the > conn > section of ipsec.conf, and an extra key file in ipsec.secrets. Here are the > additional info I added to conn section: > > --leftcert2 > --rightcert2 > --rightid2 > --rightauth2 > > Is there anything else? It will be most helpful if there is a working example > without second authentication, and a similar one with second authentication. > > Thanks, > Terry ====================================================================== Andreas Steffen [email protected] strongSwan - the Linux VPN Solution! www.strongswan.org Institute for Internet Technologies and Applications University of Applied Sciences Rapperswil CH-8640 Rapperswil (Switzerland) ===========================================================[ITA-HSR]== _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
