Hi, I am trying to configure a route to a subnet, but couldn't figured out how.
Here is my setup: Host A on subnet A (169.254.1.0) with ip address 169.254.1.1. Host B on subnet B (169.254.2.0) with ip address 169.254.2.1. Strongswan is running on both Host A and B and have IPsec tunnel between subnet A and subnet B. Host C is on subnet B with ip address 169.254.2.10. I can ping from Host A to Host C. Host C is also on another subnet C (169.254.3.0) with ip address 169.254.3.1. Host C would not have strongswan. And Host D is on same subnet C with ip address 169.254.3.2. Is there a way to set up a route such that we can ping from Host A to Host D? For example, to install a route on host A that says to get to the 169.254.3.0 net by going thru 169.254.2.10. Linux routing does not know about 169.254.2.10. Thanks, Terry _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
