Hi, did you enable XAUTH by building
./configure ... --enable-xauth-generic If you are using XAUTH then modeconfig=push doesn't make much sense. Regards Andreas On 06/24/2012 11:49 AM, Igor wrote: > Trying to use cool V5 Strongswan to replace V4.3, but it breaks > working Apple iOS VPN server config. > Complaint error like: Jun 24 09:34:41 13[CFG] no XAuth method found, > what's wrong with my config? > > Thanks. > > ipsec.secrets > > <serverIP> %any : PSK xxx > test : XAUTH "test" > > ipsec.conf > > conn apple > type=tunnel > auto=start > installpolicy=yes > authby=xauthpsk > xauth=server > modeconfig=push > left=%defaultroute > leftsubnet=0.0.0.0/0 > right=%any > > > Bests, > -Igor ====================================================================== Andreas Steffen [email protected] strongSwan - the Linux VPN Solution! www.strongswan.org Institute for Internet Technologies and Applications University of Applied Sciences Rapperswil CH-8640 Rapperswil (Switzerland) ===========================================================[ITA-HSR]== _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
