Thanks, Andreas! That works.
Regards,

Zhiheng

-----Original Message-----
From: Andreas Steffen [mailto:[email protected]] 
Sent: Monday, August 06, 2012 12:28 AM
To: Mao, Zhiheng
Cc: [email protected]
Subject: Re: [strongSwan] How to get the road warrior's virtual address, DNS 
server address, and DHCP server address together in strongswan-5.0.0?

Hi Zhiheng,

the DNS and DHCP parameters are configured in strongswan.conf.
Refer to the following link for details:

http://wiki.strongswan.org/projects/strongswan/wiki/AttrPlugin

Regards

Andreas

On 05.08.2012 19:16, Mao, Zhiheng wrote:
> Hi there,
> 
> I am looking for a way for the gateway Moon to reply to the road warrior 
> Carol during the remote access setup with its virtual IP address, DNS server 
> address, and DHCP server address together. These addresses are all statically 
> assigned by the gateway. I have got the virtual IP address part working, and 
> now I need to expand to include the DNS and DHCP addresses, so I am wondering:
> 
> --1: How can I setup the ipsec.conf for both Moon and Carol to do all three 
> addresses at once?
> --2: Any other configuration files I need to modify?
> --3: How do I verify that Carol has got the DNS server address? Carol is 
> running on a Red Hat 5 Linux machine. Should I check the /etc/resolv.conf to 
> see if the new DNS address has been added there?
> --4: How do I verify that Carol has got the DHCP server address? Carol is 
> running on a Red Hat 5 Linux machine. Where does Carol save the new DHCP 
> address?
> --5: Questions 1-4 above are all related to IPv4. What are the corresponding 
> steps for IPv6?
> 
> Thanks a lot!
> 
> Regards,
> Zhiheng

======================================================================
Andreas Steffen                         [email protected]
strongSwan - the Linux VPN Solution!                www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==


_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users

Reply via email to