Hi Martin, I understand about the 500 sec delay, but 15 minutes is 900 sec, so there is obviously some other substantial delay.
Thanks, Terry On Wed, Aug 8, 2012 at 12:59 AM, Martin Willi <[email protected]> wrote: > Hi Terry, > >> My value was set at 500 as shown above, but I didn't see the first >> attempt to send an R-U-THERE query until over 15 minutes after I >> terminated all communications between the peers > > If an ESP packet is received, the DPD delay timer is reset, as we know > the SA is still up. So a first R-U-THERE is not sent before 500s after > the last ESP/IKE packet from the peer has been seen. > > Regards > Martin > _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
