Hi everyone.
I have successfully connected my amazon vpc instance and a external
juniper device (mobile operator) in ikev1.
i dont have acces to the juniper device .
my netowrk configurarion is like
my_server_local(b.x.x.x)(10.0.0.14)===my_server_vpn(a.x.x.x)(10.0.0.178)
---- {internet} --- juniper(c.x.x.x)===172.16.108.0/23
a.x.x.x its my public ip for vpn (left)
b.x.x.x its a public ip for another instance
c.x.x.x its a public ip for juniper (right)
follow the strogswan guide for amazon y get the tunnel up.
but need the range (172.16.108.0/23) behind the juniper get connect
with my ip b.x.x.x (10.0.0.14), thats its the ip
config in the juniper to target in my server.
looking in the iptables list
have only
ACCEPT all -- 172.16.108.0/23 localhost policy
match dir in pol ipsec reqid 16384 proto esp
ACCEPT all -- localhost 172.16.108.0/23 policy
match dir out pol ipsec reqid 16384 proto esp
was thinking in do a nat in my_server_vpn pointing to
my_server_local
there are a possibility of strongswan do this route ?
Any ideas are welcome ?
Julian
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
