Dear StrongSwan Developer, When assigning IPv4 and IPv6 addresses for the single tunnel, client gets both VPN addresses, IPv4 routing is working fine, but there is no IPv6 routing/traffic over the tunnel. Server's log shows only the TS for [ 10.10.10.0/24 fec1::/64 === 10.10.10.1/32], but there is no TS for [ 10.10.10.0/24 fec1::/64 === fec1::1/128] in the log:
charon: 10[IKE] peer requested virtual IP %any charon: 10[CFG] assigning new lease to '[email protected]' charon: 10[IKE] assigning virtual IP 10.10.10.1 to peer ' [email protected]' charon: 10[IKE] peer requested virtual IP %any6 charon: 10[CFG] assigning new lease to '[email protected]' charon: 10[IKE] assigning virtual IP fec1::1 to peer '[email protected]' charon: 10[IKE] CHILD_SA client{1} established with SPIs c4baa232_i c6a51aa7_o and TS 10.10.10.0/24 fec1::/64 === 10.10.10.1/32 charon: 10[ENC] generating IKE_AUTH response 1 [ IDr AUTH CP(ADDR ADDR6) SA TSi TSr N(AUTH_LFT) N(MOBIKE_SUP) N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_6_ADDR) N(ADD_6_ADDR) ] Server's ipsec.conf: conn client leftsubnet=10.10.10.0/24,fec1::/64 rightsourceip=10.10.10.1,fec1::1/64 Client's ipsec.conf: conn home rightsubnet=10.10.10.0/24,::0/0 leftsourceip=%config4,%config6 Thank you! Robert
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
