I knew it would be that simple =/ Wouldn´t have thought that all three only speak IKEv1.
Thanks a lot! I will test this the next days. Lars On Sat, 23 Feb 2013 17:07:54 +0100, Andreas Steffen <[email protected]> wrote: > Hi Lars, > > The Shrew, iphone and GreenBow clients speak IKEv1 only. Therefore > you have to configure either > > keyexchange=ikev1 > > for IKEv1 only or > > keyexchange=ike > > for IKEv1 and IKEv2 support. > > Regards > > Andreas > > On 23.02.2013 16:38, Larsen wrote: >> I am still totally stuck on this. Still get the error "no IKE config >> found" with multiple clients. >> Any help would be greatly appreciated! >> >> >> Lars >> >> >> On Thu, 14 Feb 2013 13:23:43 +0100, Larsen <[email protected]> wrote: >> >>> Hi, >>> >>> I am new to IPsec and trying to get a roadwarrior connection from a >>> Windows XP box to work, but I only get the error "no IKE config found". >>> >>> I have tried many different settings and looked into even more search >>> results without luck. >>> VPN server is strongSwan 5.0.2 on an IPfire 2.13 rc2 where I have >>> configured all the certificates via GUI. >>> The user certificate is loaded in the ShrewSoft VPN client. >>> Out of nescience I simply used the default values where I didn´t >>> understand something. >>> >>> For my ipsec.conf see http://pastebin.com/3XV1S5AK >>> >>> # cat /var/ipfire/vpn/ipsec.secrets >>> include /etc/ipsec.user.secrets >>> : RSA /var/ipfire/certs/hostkey.pem >>> >>> ipsec.user.conf and ipsec.user.secrets are empty beside some comments. >>> >>> >>> On startup of the VPN server I get this warning/error and don´t know if >>> that is a problem or can be safely ignored: >>> >>> Feb 11 16:27:03 atl-ipfire charon: 08[CFG] invalid subnet: vhost:%no, >>> skipped >>> Feb 11 16:27:03 atl-ipfire charon: 08[CFG] invalid subnet: %priv, >>> skipped >>> >>> >>> Screenshots of my ShrewSoft Client configuration: >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120503_zpscfa99a6c.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120510_zps2b31d8c2.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120513_zps24759140.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120514_zps020b99c2.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120518_zps689e7a6f.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120519_zpsdcbf1bb4.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120521_zpsb50b961a.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120524_zps2e568ced.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120526_zps2b7573b4.png >>> http://photobucket.com/albums/a587/larsen17/capture_20130214_120529_zps1468d09d.png >>> >>> Also tried it with the following instead of "auto": >>> dh: group 2 >>> cipher: 3des >>> hash: sha1 >>> >>> >>> >>> When I try to connect, I get the error "no IKE config" in >>> "/var/log/messages": >>> >>> Feb 14 11:03:02 atl-ipfire charon: 10[NET] received packet: from >>> xxx.xxx.xxx.xxx[500] to xxx.xxx.xxx.xxx[500] >>> Feb 14 11:03:02 atl-ipfire charon: 10[NET] waiting for data on sockets >>> Feb 14 11:03:02 atl-ipfire charon: 05[MGR] checkout IKE_SA by message >>> Feb 14 11:03:02 atl-ipfire charon: 05[MGR] created IKE_SA (unnamed)[2] >>> Feb 14 11:03:03 atl-ipfire charon: 05[NET] received packet: from >>> xxx.xxx.xxx.xxx[500] to xxx.xxx.xxx.xxx[500] (3080 bytes) >>> Feb 14 11:03:03 atl-ipfire charon: 05[IKE] no IKE config found for >>> xxx.xxx.xxx.xxx...xxx.xxx.xxx.xxx, sending NO_PROPOSAL_CHOSEN >>> Feb 14 11:03:03 atl-ipfire charon: 05[NET] sending packet: from >>> xxx.xxx.xxx.xxx[500] to xxx.xxx.xxx.xxx[500] (40 bytes) >>> Feb 14 11:03:03 atl-ipfire charon: 06[NET] sending packet: from >>> xxx.xxx.xxx.xxx[500] to xxx.xxx.xxx.xxx[500] >>> Feb 14 11:03:03 atl-ipfire charon: 05[MGR] checkin and destroy IKE_SA >>> (unnamed)[2] >>> Feb 14 11:03:03 atl-ipfire charon: 05[IKE] IKE_SA (unnamed)[2] state >>> change: CREATED => DESTROYING >>> Feb 14 11:03:03 atl-ipfire charon: 05[MGR] check-in and destroy of >>> IKE_SA >>> successful >>> >>> I get the same error when I try to connect with an iPhone or the >>> GreenBow >>> VPN client, so I guess there must be something wrong on the server >>> side. >>> >>> >>> How can I fix this? What else can I test? >>> >>> >>> Lars >>> > ====================================================================== > Andreas Steffen [email protected] > strongSwan - the Linux VPN Solution! www.strongswan.org > Institute for Internet Technologies and Applications > University of Applied Sciences Rapperswil > CH-8640 Rapperswil (Switzerland) > ===========================================================[ITA-HSR]== _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
