Am Freitag, 15. März 2013, 18:13:04 schrieb Chris Arnold: > Trying to get multiple iOS devices connected to strongSwan 4.4.0 on SLES11. > When trying from iPhone 5 with iOS6, i get vpn did not respond. Nothing > appears in the charon logs either. I have verified the strongSwan public ip > is correct. Here is my iOS section of ipsec.conf: > > conn iOS > keyexchange=ikev1 > authby=xauthpsk > xauth=server > left=%defaultroute > leftsubnet=192.168.1.0/24 > right=%any > rightsourceip=192.168.3.0/24 > pfs=no > auto=add > > ipsec.secrets: > : PSK "my psk" > > I am following this advise: > http://wiki.strongswan.org/projects/strongswan/wiki/IOS_%28Apple%29 > > Can someone help with this?
I have the same problem, and upgraded to strongswan 5.0.2 because of that, but it didn't help either. My thread is "wiki article iOS". Let's see if we can solve that. ipsec statusall 000 Status of IKEv1 pluto daemon (strongSwan 4.4.0): 000 interface lo/lo 127.0.0.1:4500 000 interface lo/lo 127.0.0.1:500 000 interface lo/lo 127.0.0.2:4500 000 interface lo/lo 127.0.0.2:500 000 interface eth0/eth0 192.168.1.18:4500 000 interface eth0/eth0 192.168.1.18:500 000 %myid = '%any' 000 loaded plugins: curl ldap aes des sha1 sha2 md5 random x509 pubkey pkcs1 pgp dnskey pem openssl gcrypt hmac gmp attr 000 debug options: none 000 Virtual IP pools (size/online/offline): 000 "iOS": 255/0/0 000 000 "iOS": 192.168.1.0/24===192.168.1.18[192.168.1.18]---192.168.1.1...%any[%any]===%iOS; unrouted; eroute owner: #0 000 "iOS": ike_life: 28800s; ipsec_life: 1200s; rekey_margin: 180s; rekey_fuzz: 100%; keyingtries: 1 000 "iOS": policy: ENCRYPT+TUNNEL+XAUTHPSK+XAUTHSERVER; prio: 24,32; interface: eth0; 000 "iOS": newest ISAKMP SA: #0; newest IPsec SA: #0; 000 Does this look right? _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
