Hi, I had same issue with Shrewsoft vpn client and if I remember correctly I changed two things in client settings and then it start working, Set Exchange type to MAIN from Aggressive and set IKE Config to PULL instead of PUSH.
On 4/2/2013 3:01 PM, Chopin Ngo wrote: > Hi all, > My strongswan 5.0.2 installed in Debian 6 x64, I can connection it > with iOS client and Windows 7 client. > I create a conn section with PSK auth > > conn vpnc > keyexchange = ike > auto = add > authby = psk > left = %defaultroute > leftsubnet = 0.0.0.0/0 <http://0.0.0.0/0> > right = %any > rightsourceip = 10.0.0.0/24 <http://10.0.0.0/24> > rightauth = psk > > When I connection with VPNC 0.5.3 client, it respone error "response > was invalid [1]: (ISAKMP_N_INVALID_EXCHANGE_TYPE)(7)" > And strongswan server log > > Apr 2 17:45:52 vpn charon: 15[IKE] 123.234.123.234 is initiating a > Aggressive Mode IKE_SA > Apr 2 17:45:52 vpn charon: 15[IKE] Aggressive Mode PSK disabled for > security reasons > Apr 2 17:45:52 vpn charon: 15[ENC] generating INFORMATIONAL_V1 > request 505813678 [ N(AUTH_FAILED) ] > > I want use vpnc on tomatousb firmware with my Asus RT-N16. > I had installed strongswan 5.0.2 packages with entware on my RT-N16, > but it cannot running.(miss some kernel modules) > > > _______________________________________________ > Users mailing list > [email protected] > https://lists.strongswan.org/mailman/listinfo/users -- AzfarHashmi Cloudways Your Managed Cloud e: [email protected] w: www.cloudways.com <http://www.cloudways.com> PGP keyid: 0xF42034B0F915D729 http://keyserver.pgp.com
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
