i finaly soled it problem, my configs are :
cisco config is : Router1# hostname Router1 crypto isakmp policy 5 encr 3des hash md5 authentication pre-share group 2 lifetime 3600 crypto isakmp key 123456 address 192.168.0.1 ! crypto ipsec transform-set MINE esp-3des esp-md5 ! ip access-list extended IPSEC permit ip 10.2.0.0 0.0.255.255 10.1.0.0 0.0.255.255 ! crypto map MYMAP 10 Ipsec-isakmp ----set security-association lifetime seconds 3600 set peer 192.168.0.1 set transform-set MINE match address IPSEC ! ! ! ! interface fastEthernet1/1 ip address 192.168.0.2 255.255.255.0 no shutdown duplex auto speed auto crypto map MYMAP ! interface Ethernet1/0 ip address 10.2.0.1 255.255.0.0 duplex auto speed auto no shutdown ! ip route 0.0.0.0 0.0.0.0 192.168.0.1 ! ! Linux config i s: # /etc/ipsec.conf - strongSwan IPsec configuration file config setup conn %default ikelifetime=3600s keylife=3600s keyexchange=ikev1 authby=secret conn net-net left=192.168.0.1 leftsubnet=10.1.0.0/16 leftfirewall=yes right=192.168.0.2 rightsubnet=10.2.0.0/16 ike=3des-md5-modp1024 esp=3des-md5 type=tunnel auto=start * * * * * *
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
