On Fri, Oct 25, 2013 at 11:27 AM, Ccf Cloud <[email protected]> wrote:
> Hi Martin, > > Thanks for the quick reply. > > On Thu, Oct 24, 2013 at 12:45 PM, Martin Willi <[email protected]>wrote: > >> Hi, >> >> > I want to route all the traffic originating from android device to be >> > tunneled through the gateway using the tun0 interface. >> >> The Android App does no narrowing itself, that happens on the responder >> only. To tunnel all traffic from the Android device, set >> leftsubnet=0.0.0.0/0 on the responder. >> > > So now my Android device proposes both TSi and TSr as 0.0.0.0/0 and in > the gateway I've configured leftsunet as 0.0.0.0/0. > Now when I establish the tunnel, typing "ip route show" in android device > shows following: > > 0.0.0.0/1 dev tun0 scope link > default via 10.10.11.1 dev wlan0 > 10.10.11.0/24 dev wlan0 proto kernel scope link src 10.10.11.5 > 10.10.11.1 dev wlan0 scope link > 128.0.0.0/1 dev tun0 scope link > > Correction: > where 10.10.11.5 is the ip address of android device over the wlan0 > interface and tun0 also gets same virtual Ip assigned by the gateway. > > With this when I run tcpdum on both tun0 and wlan0, I see all the ESP > packets going through Wlan0 and not tun0. > > What am I missing here? Why is the route added as 0.0.0.0/1? My intention > is to route all the traffic originating from my android device to the > gateway using the tun0 interface. > > >> >> Regards >> Martin >> >> > Thanks & Regards > Sam > > >
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
