Or is your remote peer ID = cisco? If it is equal to cisco, the following:
cisco : PSK password Izz Abdullah Senior Systems Engineer [email protected]<mailto:[email protected]> 205.605.6039 Office 800.675.7639 Toll Free www.wepanow.com<http://www.wepanow.com> [cid:[email protected]] ________________________________ From: Izz Abdullah <[email protected]><mailto:[email protected]> Sent: Wednesday, November 20, 2013 10:52 To: [email protected]<mailto:[email protected]> <[email protected]><mailto:[email protected]> Subject: Re: [strongSwan] recurring problem of PSK, but cannot spot the error I ran into this same problem when I first setup strongSwan. The ipsec.secrets file is in the format like so: RemoteID : PSK PSK_VALUE 192.168.168.161 : PSK password No need for quotes, and since your ID of the remote peer is the same as the IP, then the above should work. Izz Abdullah Senior Systems Engineer [email protected]<mailto:[email protected]> 205.605.6039 Office 800.675.7639 Toll Free www.wepanow.com<http://www.wepanow.com> [cid:[email protected]] ________________________________ From: Noel Kuntze <[email protected]><mailto:[email protected]> Sent: Wednesday, November 20, 2013 10:48 To: ilyas Guennoun <[email protected]><mailto:[email protected]>, [email protected]<mailto:[email protected]> <[email protected]><mailto:[email protected]> Subject: Re: [strongSwan] recurring problem of PSK, but cannot spot the error $ more /etc/ipsec.secrets > 192.168.168.152 192.168.168.161 : PSK "password" _______________________________________________ Users mailing list [email protected]<mailto:[email protected]> https://lists.strongswan.org/mailman/listinfo/users
<<attachment: wepa_logo.png>>
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
