Hi, you can activate Dead Peer Detection (DPD) on the VPN gateway. When the VM client force closes this will be detected after the DPD timeout (usually after about 2-3 minutes depending on the configured DPD parameters) and the connection will be shut down properly by the VPN gateway which in turn is reporting to the RADIUS server.
Regards Andreas On 10/11/2014 11:02 AM, Xin wrote: > Hello, > > I found a problem in 5.2.0, my “rightauth” is “eap-radius”. When a VM > user connect, and then the user force close the VM, the radius side > should receive the User-Disconnect-Message to record the user stops. > Because the user’s socket is closed. But in my test case, there is no > such message send to the radius side. So if the radius only allow 1 > account login, and the user will hang and never stop. Appreciate for > response. ====================================================================== Andreas Steffen [email protected] strongSwan - the Open Source VPN Solution! www.strongswan.org Institute for Internet Technologies and Applications University of Applied Sciences Rapperswil CH-8640 Rapperswil (Switzerland) ===========================================================[ITA-HSR]==
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
