Hi Andreas, thanks for the feedback. The leftid is already set tot he FQDN of the server "leftid=@FQDN of the server". I alo checked, if I had a typo error. The server is reachable from the internet via the FQDN.
I just removed the FQDN in the logs I sent through the list. Now the Lumia shows me the error 809, that the server didn't respond, but there is a kind of communication between the lumia and strongswan: 10[ENC] generating IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(MULT_AUTH) ] 10[NET] sending packet: from removed IP[500] to removed IP[500] (308 bytes) 08[NET] received packet: from remove IP[500] to removed IP[500] (616 bytes) 08[ENC] parsed IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) V V V V ] 08[IKE] received retransmit of request with ID 0, retransmitting response 08[NET] sending packet: from removed IP[500] to removed IP[500] (308 bytes) 15[NET] received packet: from removed IP[500] to removed IP[500] (616 bytes) 15[ENC] parsed IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) V V V V ] 15[IKE] received retransmit of request with ID 0, retransmitting response 15[NET] sending packet: from removed IP[500] to removed IP[500] (308 bytes) Andy > -----Ursprüngliche Nachricht----- > Von: Andreas Steffen [mailto:[email protected]] > Gesendet: Dienstag, 28. Oktober 2014 08:01 > An: raceface; [email protected] > Betreff: Re: [strongSwan] Strongswan and WP8.1 > > Hello Andy, > > see my inline comments. > > On 10/27/2014 10:24 PM, raceface wrote: > > Hi all, > > > > I installed strongswan 5.2 on Debian wheezy running on a KVM machine. > > Strongswan is up and running and can be reached from outside. But > there > > seems to be something wrong with the certs. > > > > The ca.crt is created including > > > > basicConstraints = critical, CA:true > > extendedKeyUsage = serverAuth > > keyUsage = critical, keyCertSign, cRLSign > > > > and the server.crt is created including > > > > extendedKeyUsage = serverAuth > > subjectAltName = DNS:FQDN removed > > authorityKeyIdentifier=keyid > > > Server certificate seems ok if FQDN is contained as subjectAltName > and serverAuth EKU is set. > > CA certificate does not need serverAuth EKU but the presence probably > does not do any harm. > > > The ca.crt is already installed on the lumia and a reboot is > performed. > > > > After starting strongswan with --nofork I get following messages: > > Starting strongSwan 5.2.0 IPsec [starter]... > > 00[DMN] Starting IKE charon daemon (strongSwan 5.2.0, Linux 3.2.0-4- > amd64, > > x86_64) > > 00[CFG] HA config misses local/remote address > > 00[LIB] plugin 'ha': failed to load - ha_plugin_create returned NULL > > 00[CFG] loading ca certificates from '/etc/ipsec.d/cacerts' > > 00[CFG] loaded ca certificate "C=DE, ST=Some-State, O=andy, > CN=removed" > > from '/etc/ipsec.d/cacerts/ca.crt' > > 00[CFG] loading aa certificates from '/etc/ipsec.d/aacerts' > > 00[CFG] loading ocsp signer certificates from > '/etc/ipsec.d/ocspcerts' > > 00[CFG] loading attribute certificates from '/etc/ipsec.d/acerts' > > 00[CFG] loading crls from '/etc/ipsec.d/crls' > > 00[CFG] loading secrets from '/etc/ipsec.secrets' > > 00[CFG] loading secrets from '/var/lib/strongswan/ipsec.secrets.inc' > > 00[CFG] loaded RSA private key from > '/etc/ipsec.d/private/server.key' > > 00[CFG] loaded EAP secret for "aceface2nd" > > 00[CFG] loaded 0 RADIUS server configurations > > 00[LIB] loaded plugins: charon aes rc2 sha1 sha2 md5 random nonce > x509 > > revocation constraints pubkey pkcs1 pkcs7 pkcs8 pkcs12 pgp dnskey > sshkey pem > > openssl fips-prf gmp agent xcbc hmac gcm attr kernel-netlink resolve > > socket-default farp stroke updown eap-identity eap-aka eap-md5 eap- > gtc > > eap-mschapv2 eap-radius eap-tls eap-ttls eap-tnc xauth-generic xauth- > eap > > xauth-pam tnc-tnccs dhcp lookip error-notify certexpire led addrblock > unity > > 00[LIB] unable to load 5 plugin features (5 due to unmet > dependencies) > > 00[LIB] dropped capabilities, running as uid 0, gid 0 > > 00[JOB] spawning 16 worker threads > > charon (3751) started after 60 ms > > 03[CFG] received stroke: add connection 'rw-mschapv2' > > 03[CFG] left nor right host is our side, assuming left=local > > 03[CFG] adding virtual IP address pool 10.0.0.0/24 > > 03[CFG] loaded certificate "C=DE, ST=Some-State, O=andy, > CN=removed" from > > 'server.crt' > > 03[CFG] id 'removed' not confirmed by certificate, defaulting to > 'C=DE, > > ST=Some-State, O=andy, CN=removed' > You have to set leftid=<FQDN of the server> as contained in the > subjectAltName of the certificate, because by default leftid is set to > the IP address defined by left which in your case is %any. > > > 03[CFG] added configuration 'rw-mschapv2' > > 01[CFG] received stroke: initiate 'rw-mschapv2' > > 01[IKE] unable to resolve %any, initiate aborted > > 01[MGR] tried to check-in and delete nonexisting IKE_SA > > 09[NET] received packet: from removed[500] to removed[500] (616 > bytes) > > 09[ENC] parsed IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) > N(NATD_D_IP) V > > V V V ] > > 09[ENC] received unknown vendor ID: > > 1e:2b:51:69:05:99:1c:7d:7c:96:fc:bf:b5:87:e4:61:00:00:00:09 > > 09[ENC] received unknown vendor ID: > > fb:1d:e3:cd:f3:41:b7:ea:16:b7:e5:be:08:55:f1:20 > > 09[ENC] received unknown vendor ID: > > 26:24:4d:38:ed:db:61:b3:17:2a:36:e3:d0:cf:b8:19 > > 09[ENC] received unknown vendor ID: > > 01:52:8b:bb:c0:06:96:12:18:49:ab:9a:1c:5b:2a:51:00:00:00:02 > > 09[IKE] removed is initiating an IKE_SA > > 09[IKE] remote host is behind NAT > > 09[ENC] generating IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) > > N(NATD_D_IP) N(MULT_AUTH) ] > > 09[NET] sending packet: from removed[500] to removed[500] (308 bytes) > > 07[NET] received packet: from removed[17224] to removed[4500] (1324 > bytes) > > 07[ENC] parsed IKE_AUTH request 1 [ IDi CERTREQ N(MOBIKE_SUP) > CPRQ(ADDR DNS > > NBNS SRV ADDR6 DNS6 SRV6) SA TSi TSr ] > > 07[IKE] received cert request for "C=DE, ST=Some-State, O=andy, > CN=removed" > > 07[IKE] received 49 cert requests for an unknown ca > > 07[CFG] looking for peer configs matching > removed[%any]...removed[removed] > > 07[CFG] selected peer config 'rw-mschapv2' > > 07[IKE] initiating EAP_IDENTITY method (id 0x00) > > 07[IKE] peer supports MOBIKE > > 07[IKE] authentication of 'C=DE, ST=Some-State, O=andy, CN=removed' > (myself) > > with RSA signature successful > > 07[IKE] sending end entity cert "C=DE, ST=Some-State, O=andy, > CN=removed" > > 07[ENC] generating IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/ID ] > > 07[NET] sending packet: from removed[4500] to removed[17224] (932 > bytes) > > 02[JOB] deleting half open IKE_SA after timeout > > > > The lumia is quitting the job with error message 13801. > The Lumia has a problem either with the digital signature, the server > ID, > the server certificate or the CA certificate. For the actual reason you > have to look on the Lumia side. Error message 13801 does not really > help. > > > Any hints what I need to do for correction? I am wondering that > strongswan > > is loggin "id . . . not confirmed by certificate" while starting and > "unable > > to resolve %any". > > > > Thanks for your help! > > > > Andy > > Best regards > > Andreas > > ====================================================================== > Andreas Steffen [email protected] > strongSwan - the Open Source VPN Solution! www.strongswan.org > Institute for Internet Technologies and Applications > University of Applied Sciences Rapperswil > CH-8640 Rapperswil (Switzerland) > ===========================================================[ITA-HSR]== _______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
