Thanks Martin! At least I know that I need to find an another solution [ eg Virtual-IP on the remote end]
Regards, > Subject: Re: [strongSwan] stateless high availability > From: [email protected] > To: [email protected] > CC: [email protected] > Date: Fri, 27 Feb 2015 10:29:18 +0100 > > Hi, > > > Is there a way to configure a device to connect to a gateway [ eg > > 10.1.1.254]. If that gateway fails [ detected via DPD],it would > > connect to 10.1.1.253 [ his backup gateway]? > > No, specifying fallback addresses is currently not implemented in > strongSwan. > > > I've tried with right=10.1.1.254,10.1.1.253 > > Specifying multiple addresses is supported, but it currently works only > for matching the endpoints of connection attempts to configurations. > > > it does not seems to work [ it expects an identity > > 10.1.1.254,10.1.1.253 on the remote. > > rightid defaults to right, so if you have more than a single address, > you should define rightid explicitly. But as said, having multiple > addresses in right currently does not what you intend. > > Regards > Martin >
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
