Hi ,
I am trying to configure two IPSec tunnels for icmp and udp. My configuration
is as below
conn %default
l leftcert=cert.pem
leftid="local"
rightid="remote"
leftfirewall=yes
right=10.222.191.83
rightsubnet=10.222.190.40/32
left=10.222.191.42
leftsourceip=10.222.0.1
auto=add
conn home
leftprotoport=icmp
rightprotoport=icmp
conn home2
leftprotoport=udp
rightprotoport=udp
When I give 'ipsec up home' connection home is successfully established(child
sa created). But then when I tryto establish second connection by giving 'ipsec
up home2' it fails with TS Unacceptable error on gateway( traffic selectors
10.222.190.40/32[udp/65535]===0.0.0.0/0[udp/17383] inacceptable. Even if I give
command to up the home2 , the connection fails with same error
This problem is not there when I use leftsubnet instead of leftsourceip. It
seems that when leftsourceip is used , peer selects the first connection
automatically.
Am I doing anything wrong here ? or is it a known issue ?
Best Regards,
Prasobh
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain proprietary, confidential or privileged information. If you are not the
intended recipient, you should not disseminate, distribute or copy this e-mail.
Please notify the sender immediately and destroy all copies of this message and
any attachments. WARNING: Computer viruses can be transmitted via email. The
recipient should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by any virus
transmitted by this email. www.wipro.com
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
