The following flags used for client
X509v3 extensions:
X509v3 Authority Key Identifier:
keyid:9F:65:08:93:F3:CC:4E:32:78:37:47:4C:8B:9C:13:DA:A3:94:0D:B0
X509v3 Subject Alternative Name:
DNS:XXXXXXXXXXX
X509v3 Extended Key Usage:
TLS Web Server Authentication, 1.3.6.1.5.5.8.2.2
Thia one for server
X509v3 extensions:
X509v3 Authority Key Identifier:
keyid:9F:65:08:93:F3:CC:4E:32:78:37:47:4C:8B:9C:13:DA:A3:94:0D:B0
X509v3 Subject Alternative Name:
DNS:XXXXXXXXXXXX
X509v3 Extended Key Usage:
TLS Web Server Authentication, 1.3.6.1.5.5.8.2.2
Still no luck without ignore-ipsec-keyusage, but now I suspect server
cert. ASA is complaining about Certificate validation failed. Peer
certificate key usage is invalid, serial number: 1577E3E8F6F3AD90,
subject name: cn=xxxxxxxxxx,o=xxxxxxxx,c=RU.
Server is generated with --flag serverAuth --flag ikeIntermediate --san
xxxxxxxxx options. I took them from StrongSwan wiki
On 27/05/2015 00:10, Richard Huber wrote:
Hello,
I am trying to connect strongswan with openswan.
It works for 60 seconds, then it all dies until I restart ipsec, then
it works for another 60 seconds...
$ sudo ipsec status
Security Associations (1 up, 0 connecting):
hub[1]: ESTABLISHED 17 seconds ago, x[x]...y[y]
hub{1}: INSTALLED, TUNNEL, ESP SPIs: ca70896d_i 1d4e67fe_o
hub{1}: 192.168.45.0/24 === 10.193.160.0/23
Fine, connection is up and running!
After one minute this happens:
$ sudo ipsec status
Security Associations (2 up, 0 connecting):
hub[2]: ESTABLISHED 11 seconds ago, x[x]...y[y]
hub[1]: DELETING, x[x]...y[y]
hub{1}: INSTALLED, TUNNEL, ESP SPIs: ca70896d_i 1d4e67fe_o
hub{1}: 192.168.45.0/24 === 10.193.160.0/23
Log entry in auth.log
May 26 22:49:27 toto charon: 08[IKE] y is initiating a Main Mode IKE_SA
May 26 22:49:27 toto charon: 15[IKE] deleting IKE_SA hub[1] between
x[x]...y[y]
Then all trafic is dead:
$ sudo ipsec status
Security Associations (1 up, 0 connecting):
hub[2]: ESTABLISHED 2 minutes ago, x[x]...y[y]
Here are the logs from the openswan server:
$ sudo ipsec auto --status | grep hub
000 "hub":
10.193.160.0/23===y<y>[+S=C]...x<x>[+S=C]===192.168.45.0/24; erouted;
eroute owner: #76
000 "hub": myip=unset; hisip=unset;
000 "hub": ike_life: 3600s; ipsec_life: 28800s; rekey_margin: 540s;
rekey_fuzz: 100%; keyingtries: 0
000 "hub": policy:
PSK+ENCRYPT+TUNNEL+PFS+UP+IKEv2ALLOW+SAREFTRACK+lKOD+rKOD; prio:
23,24; interface: eth0;
000 "hub": newest ISAKMP SA: #77; newest IPsec SA: #76;
000 "hub": IKE algorithm newest: AES_CBC_128-SHA1-MODP2048
000 "hub": ESP algorithms wanted: 3DES(3)_000-MD5(1)_1024;
flags=-strict
000 "hub": ESP algorithms loaded: 3DES(3)_192-MD5(1)_1024
000 "hub": ESP algorithm newest: 3DES_192-HMAC_MD5; pfsgroup=<Phase1>
000 #98: "hub":500 STATE_QUICK_I1 (sent QI1, expecting QR1);
EVENT_RETRANSMIT in 6s; lastdpd=-1s(seq in:0 out:0); idle;
import:admin initiate
000 #77: "hub":500 STATE_MAIN_I4 (ISAKMP SA established);
EVENT_SA_REPLACE in 1907s; newest ISAKMP; lastdpd=-1s(seq in:0 out:0);
idle; import:admin initiate
000 #76: "hub":500 STATE_PARENT_R2 (received v2I2, PARENT SA
established); EVENT_SA_REPLACE in 27535s; newest IPSEC; eroute owner;
nodpd; idle; import:respond to stranger
conn hub
right=y
rightsubnet=10.193.160.0/23
left=x
leftsubnet=192.168.45.0/24
auto=start
authby=secret
esp=3des-md5-1024
pfs=yes
#keyexchange = ike
What have I done wrong? :-)
/Richard
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
