Thanks, Noel.
> 'C=ES, O=ACCV, CN=ACCVRAIZ1'Now I set as follows "C=JP, ST=Some-State, O=XXX,
>OU=TSO, CN=Radius-1_CA@test" on CA. "C=JP, ST=Some-State, O=XXX, OU=TSO,
>CN=Radius-1_Svr@test" issued by on the CA. #self-signed certificate
And I set as follows on StrongSwan:# eap-ttls-radius configuration
rightid=Radius-1@test aaa_identity="C=JP, O=XXX, CN=Radius-1_svr@test"
Regards,
On Monday, 29 February 2016, 4:44, Noel Kuntze <[email protected]>
wrote:
Now you're just fishing in the dark and guessing.
The format of the certificate is irrelevant. Read the log you pasted and fix the
> Feb 25 14:41:13 tester charon: 05[TLS] server certificate does not match to
> 'C=ES, O=ACCV, CN=ACCVRAIZ1'
I guess that's from the client. Where did you set that DN?
Regards,
Noel
On 28.02.2016 20:37, yukou katori wrote:
> Hi, Noel
>
> Or this "access denied" can come from pkcs format?
> pkcs#7 is used in this case, pkcs#12 should be used?
>
> Regards,
>
>
> On Sunday, 28 February 2016, 15:20, yukou katori <[email protected]>
> wrote:
>
>
> Hi, Noel
>
> Thanks.
> I complied again to isolate this problem.
> The reason why no item about certificates was shown by "ipsec listall" came
> from that I imported incorrect certificate from FreeRadius.
> Now I could get the item about CA by "ipsec install".
>
> But I get the same error yet.
>
> What does "access denied" mean?
> This is for TLS 1.2 but, it means:
> access_denied
> A valid certificate was received, but when access control was
> applied, the sender decided not to proceed with negotiation. This
> message is always fatal.
> from rfc5246
>
> Access control?
>
> I complied like this:
> ./configure --prefix=/usr/local --sysconfdir=/usr/local/etc
> --enable-eap-identity --enable-eap-tls --enable-eap-peap --enable-eap-ttls
> --enable-eap-mschapv2 --enable-eap-md5
>
> Regards,
>
--
Mit freundlichen Grüßen/Kind Regards,
Noel Kuntze
GPG Key ID: 0x63EC6658
Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
