Andreas, It seems like Charon daemon is not running, When I run the charon command, it immediately stops it. Where can I find the charon log to see if there is any issue?
rnohria@ubuntu:~$ sudo /usr/local/libexec/ipsec/charon& [1] 7272 rnohria@ubuntu:~$ [1]+ Stopped sudo /usr/local/libexec/ipsec/charon Thanks, Rajeev On Wed, May 11, 2016 at 2:55 AM, Andreas Steffen < [email protected]> wrote: > Hi Rajeev, > > can you check in the charon log if the vici plugin has been loaded? > And do you see the charon daemon running in the process status > (ps aux | grep charon)? > > Regards > > Andreas > > On 05/11/2016 04:04 AM, rajeev nohria wrote: > > Thanks Andreas, > > > > I ran the charon and also copied the charon script file to /etc/init.d. > > Now when I run sudo swanctl --load-conn, I still get the same issue. > > connecting to 'unix:///var/run/charon.vici' failed: No such file or > > directory > > Error: connecting to 'default' URI failed: No such file or directory > > strongSwan 5.4.0 swanctl > > usage: > > swanctl --load-conns [--raw|--pretty] > > --help (-h) show usage information > > --raw (-r) dump raw response message > > --pretty (-P) dump raw response message in pretty > print > > --debug (-v) set debug level, default: 1 > > --options (-+) read command line options from file > > --uri (-u) service URI to connect to > > > > > > Am I missing any other step? > > > > Thanks, > > Rajeev > > > > On Tue, May 10, 2016 at 3:59 AM, Andreas Steffen > > <[email protected] <mailto:[email protected]>> > > wrote: > > > > Hi Rajeev, > > > > is the charon daemon running? If not, either start charon manually: > > > > sudo /usr/local/libexec/ipsec/charon & > > > > or if your Linux distribution still uses upstart, copy the > > following script to /etc/init.d/ > > > > > > > https://wiki.strongswan.org/projects/strongswan/repository/revisions/master/entry/testing/hosts/default/etc/init.d/charon > > > > and start the charon daemon in the appropriate runlevels. > > > > If your Linux distribution uses systemd instead, compile and > > install strongSwan with > > > > ./config --enable-systemd > > > > and enable and start the strongswan-swanctl service. > > > > BTW - in order to use the vici socket you must be root. Thus > > > > sudo swanctl --load-conn > > > > Best regards > > > > Andreas > > > > > > On 09.05.2016 16:34, rajeev nohria wrote: > > > > I am new user of Strongswan and running 5.4.0. After creating > > certificates and configuring two Ubuntu m/c with Strongswan > > 5.4.0. I try > > to create connection as following and get error. Please advise, > > how to > > resolve following issue? > > > > $swanctl --load-conn > > connecting to 'unix:///var/run/charon.vici' failed: No such file > or > > directory > > Error: connecting to 'default' URI failed: No such file or > directory > > strongSwan 5.4.0 swanctl > > usage: > > > > > > Thanks, > > Rajeev > > > > > > _______________________________________________ > > Users mailing list > > [email protected] <mailto:[email protected]> > > https://lists.strongswan.org/mailman/listinfo/users > > > > > > -- > > > ====================================================================== > > Andreas Steffen > > [email protected] <mailto: > [email protected]> > > strongSwan - the Open Source VPN Solution! > > www.strongswan.org <http://www.strongswan.org> > > Institute for Internet Technologies and Applications > > University of Applied Sciences Rapperswil > > CH-8640 Rapperswil (Switzerland) > > > ===========================================================[ITA-HSR]== > > > > > > > -- > ====================================================================== > Andreas Steffen [email protected] > strongSwan - the Open Source VPN Solution! www.strongswan.org > Institute for Internet Technologies and Applications > University of Applied Sciences Rapperswil > CH-8640 Rapperswil (Switzerland) > ===========================================================[ITA-HSR]== > >
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
