Hi All, I am new to strongswan and trying to protect host-host traffic using ipsec tunnel mode. However I observe that only the traffic between endpoints are protected and not complete traffic.
*Strongswan Version*: Linux strongSwan U5.3.2/K3.12.19-rt30 *Topology*: <<<<<LAN1>>>> ------- GW_A <---------- internet---------------> GW_B -------------------- <<<<<LAN2>>>>>> *Requirement:* To protect all traffic from LAN1 to LAN2 and vice versa. LAN<> can have many subnets. *Current setup:* I brought a IPsec with tunnel mode between GW_A and GW_B. My understanding is that when tunnel mode is enabled, the LAN traffic will be protected by adding outer headers(GW_A, GW_B) but I see that the LAN traffic is going in cleartext. The traffic with only <src:GW_A,dst:GW_B> and vice versa are protected. As there are many subnets and they are dynamic, its not feasible to configure many left/right subnets. Can you please help me with this - any config addition/any change in routing table? Regards, Sarat
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
